Emerson CF200n100 owner manual How to Hang Your Ceiling Fan, Ceiling AT Least Floor, Tab

Page 9

BP7354 CF200 9/19/07 11:30 AM Page 9

19. The fan comes with blue, black and white leads that are 80” long. Before installing the fan, measure up approxi- mately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2” from end of leads.

20. You have now completed the initial assembly of your new ceiling fan. You can now proceed with hanging and wiring your fan.

1. Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box (Figure 14).

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

How to Hang

Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 13).

CEILING

AT LEAST

7'

FLOOR

Figure 13

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable

OUTLET

BOX

TWO SCREWS

 

SUPPLIED

 

WITH

 

OUTLET BOX

HANGER

 

BRACKET

 

TAB

Figure 14

2.Carefully lift the fan and seat the hang- er ball/downrod assembly on the hang- er bracket that was just attached to the outlet box (Figure 15). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 14).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.

for Fan Support”.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws sup- plied with outlet box. Most outlet boxes commonly used for support of

Figure 15

OUTLET

BOX

HANGER

BRACKET

HANGER BALL/ DOWNROD ASSEMBLY

light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electri- cian if in doubt.

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

9

U.L. Model No.: CF200

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Cityscape Date Code Safety InstructionsTools Needed for Assembly MaterialsUnpacking Instructions Installation of Battery Preset Memory FeatureSetting Operating Frequency of Transmitter Receiver GeneralElectrical Requirements How to Assemble Your Ceiling FanSwitch Housing Assembly Light Fitter White Wires Black Wire BlueConnector Switch Housing Assembly Blade Flange Motor HUBHairpin Clip PIN Hanger Ball Downrod SetscrewSetscrew Motor Clevis PINDecorative ROD Assembly Motor Cover Housing Decorative ROD ScrewROD Support Grommet ScrewsCeiling AT Least Floor How to Hang Your Ceiling FanOutlet BOX TWO Screws Supplied With TABStud How to Wire Your Ceiling FanWhite Ground RED BlackBlack Blue Ceiling CoverInstallation Storage Bracket Reversing SwitchOperating Your Ceiling Fan Important Care Instructions MaintenanceAccessoriesTrouble Probable Cause Suggested Remedy Trouble ShootingDescription Repair Parts ListingLimited Warranty

CF200n100 specifications

The Emerson CF200N100 is a cutting-edge fan controller designed to provide optimal air circulation and temperature control in various environments. Known for its efficiency and advanced features, this model has found applications in residential, commercial, and industrial settings.

One of the standout characteristics of the CF200N100 is its energy efficiency. Designed to operate with minimal power consumption, this unit helps reduce electricity costs while maintaining effective airflow. It integrates advanced technologies that allow for precise control over fan speed, facilitating customized air distribution according to specific needs.

The CF200N100 employs a microprocessor-based control system that enhances stability and reliability. This technology allows for intelligent programming, enabling users to set specific temperature thresholds and operational schedules. With a user-friendly interface, the controller simplifies adjustments and makes it convenient to monitor performance.

Another significant feature of the Emerson CF200N100 is its compatibility with various fan types and setups. Whether used in ducted systems or standalone fans, the controller can adapt to different configurations, making it a versatile choice for any installation. Its flexibility also extends to integration with existing HVAC systems, providing seamless functionality in retrofitting scenarios.

The unit showcases various safety features, including overcurrent protection and temperature monitoring, ensuring that both the device and connected fans operate within safe limits. This not only prolongs the lifespan of the equipment but also enhances user peace of mind.

For communication, the CF200N100 is equipped with advanced connectivity options, allowing for integration with smart home systems. Users can control fan settings remotely, making adjustments from anywhere through compatible devices. This capability not only adds convenience but also allows for real-time monitoring of environmental conditions.

The design of the Emerson CF200N100 is compact, ensuring that it can be installed in tight spaces without compromising performance. Its robust construction contributes to its durability, ensuring that it withstands the demands of continuous operation.

In summary, the Emerson CF200N100 is a feature-rich fan controller that promises efficiency, flexibility, and advanced control. Its energy-saving technologies, user-friendly design, and integration options make it an excellent choice for anyone looking to improve their air circulation systems. Whether for residential use or in more demanding commercial settings, the CF200N100 stands out as a reliable solution in modern climate control management.
Top Page Image Contents