General Safety Instructions For Power Tools

WARNING: FAILURE TO HEED ALL SAFETY AND OPERATING INSTRUCTIONS AND WARNINGS REGARDING USE OF THIS PRODUCT CAN RESULT IN SERIOUS BODILY INJURY.

GENERAL SAFETY INSTRUCTIONS

FOR POWER TOOLS

1.KNOW YOUR POWER TOOL

Read the owner’s manual carefully. Learn its appli- cation and limitations as well as the specific poten- tial hazards peculiar to this tool.

2.GROUND ALL TOOLS (UNLESS DOUBLE INSULATED)

If tool is equipped with an approved 3-conductor cord and a 3-prong grounding type plug to fit the proper grounding type receptacle. The green con- ductor in the cord is the grounding wire. Never connect the green wire to a live terminal.

3.KEEP GUARDS IN PLACE

In working order, and in proper adjustment and alignment.

4.REMOVE ADJUSTING KEYS AND WRENCHES Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

5.KEEP WORK AREA CLEAN

Cluttered areas and benches invite accidents. Floor must not be slippery due to wax or sawdust.

6.AVOID DANGEROUS ENVIRONMENT

Don’t use power tools in damp or wet locations or expose them to rain. Keep work area well lighted. Provide adequate surrounding work space.

7.KEEP CHILDREN AWAY

All visitors should be kept a safe distance from the work area.

8.MAKE WORKSHOP KID-PROOF

— with padlocks, master switches, or by removing the starter keys.

9.DON’T FORCE TOOL

It will do the job better and safer at the rate for which it was designed.

10.USE THE RIGHT TOOL

Don’t force tool or attachment to do a job it was not designed for.

11.WEAR RIGHT APPAREL

Do not wear loose clothing, gloves, neckties or jewelry (rings, wristwatches) to get caught in mov- ing parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. Roll long sleeves above the elbow.

12.USE SAFETY GOGGLES (Head Protection) Wear Safety goggles (must comply with ANSI Z87.1) at all times. Also, use face or dust mask if cutting operation is dusty, and ear protectors (plugs or muffs) during extended periods of operation.

13.SECURE WORK

Use clamps or a vise to hold work when practical. It’s safer than using your hand, frees both hands to operate tool.

14.DON’T OVERREACH

Keep proper footing and balance at all times.

15.MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

16.DISCONNECT TOOLS

before servicing; when changing accessories such as blades, bits, cutters, etc.

17.AVOID ACCIDENTAL STARTING

Make sure switch is in “OFF” position before plug- ging in.

18.USE RECOMMENDED ACCESSORIES

Consult the owner’s manual for recommended accessories. Follow the instructions that accom- pany the accessories. The use of improper acces- sories may cause hazards.

19.NEVER STAND ON TOOL

Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.

Do not store materials above or near the tool such that it is necessary to stand on the tool to reach them.

20.CHECK DAMAGED PARTS

Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is dam- aged should be properly repaired or replaced.

21.NEVER LEAVE TOOL RUNNING UNATTENDED Turn power off. Don’t leave tool until it comes to a complete stop.

ADDITIONAL SAFETY INSTRUCTIONS FOR

wolfcraft® DRILL GUIDE

1.ALWAYS USE EYE PROTECTION

The operation of any power tool can result in for- eign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety goggles complying with ANSI Z87.1 before com- mencing power tool operation.

2.KEEP DRILL CLEAN

After every use, clean sawdust off the drill and bits.

3.WARNING

Always turn “OFF” the drill and disconnect the power cord when installing the cutter or bit and/or adjusting the depth of cut.

4525 specifications

The Wolfcraft 4525 is an innovative and versatile tool designed for both amateur DIY enthusiasts and professional craftsmen. This multipurpose tool is primarily known for its woodworking capabilities, but its features allow it to be utilized in a range of applications, making it an essential addition to any workshop.

One of the most outstanding features of the Wolfcraft 4525 is its precision. The tool includes a cutting guide that ensures accurate and clean cuts every time. This is particularly beneficial for complex projects that require exact measurements. The integrated measurement scale helps users to work with high accuracy, ensuring that each dimension is just right.

Another key characteristic of the Wolfcraft 4525 is its sturdy construction. It is made from high-quality materials that provide durability and reliability over time. The German engineering behind the product ensures that it can withstand rigorous use while maintaining its performance. This tool is built to last, making it a smart investment for anyone serious about their woodworking projects.

Technologically, the Wolfcraft 4525 employs a variety of cutting-edge innovations. Its adjustable angles and depth settings allow for versatility in a range of cutting applications, from simple crosscuts to more intricate bevel cuts. The user-friendly design features quick-release mechanisms that enable swift adjustments without the need for extra tools.

The ergonomic design of the Wolfcraft 4525 ensures that it is comfortable to handle during lengthy projects. The soft grip areas provide added comfort and reduce fatigue, allowing users to work longer and with greater precision. Additionally, the tool's lightweight nature makes it easy to maneuver without sacrificing stability.

Furthermore, the Wolfcraft 4525 has been praised for its adaptability. It can accommodate various blades, making it suitable for different materials such as wood, metal, and plastics. This flexibility enhances its usability, making it a go-to tool for a multitude of tasks.

In summary, the Wolfcraft 4525 stands out for its precision, durability, and versatility. Featuring advanced technology and user-friendly design, it meets the demands of both hobbyists and professionals alike. Whether you are a seasoned woodworker or a beginner, the Wolfcraft 4525 is a powerful tool that can help bring your creative projects to life with ease and accuracy.