Bevel Detent, Kerf Indicator Fig, Operation

1.To set the saw for a bevel cut, raise the lever (L) or turn the knob

(O) to loosen the bevel adjustment.

2.Tilt the shoe to the desired angle by aligning the pointer with the desired angle mark on the pivot bracket.

3.Retighten the bevel adjustment by lowering the lever or turning the knob.

FIG. 8

DW367

Bevel Detent (Fig. 7, 8)

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

The DW367 has a bevel stop at 45 degrees. To set the bevel at an angle greater than 45 degrees, tilt the shoe to 45 degrees, then slide the knob and bolt into the upper slot. When you reach the desired angle, tighten the knob.

The DW368 and DW369 are equipped with a bevel detent feature. As you tilt the shoe you will hear a click and feel the shoe stop at both

22.5and 45 degrees. If either of these is the desired angle, retighten the lever (L) by lowering it. If you desire another angle, continue tilting the shoe until the pointer aligns with the desired mark.

FIG. 9	1/4"	1/2"	45˚	0˚
	6.35 mm	13 mm	45˚	0˚
	6.35 mm	13 mm
				English

Kerf Indicator (Fig. 9)

The front of the saw shoe has a kerf indicator for vertical and bevel cutting. This indicator enables you to guide the saw along cutting lines penciled on the material being cut. The indicator lines up with the left (inner) side of the saw blade, which makes the slot or "kerf" cut by the moving blade fall to the right of the indicator. The ribs on the front of the DW368 and DW369 shoe are at 1/4" (6.35 mm) spacing. The notches on the front of the shoe are at 1/2" (13 mm) intervals.

OPERATION

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

Switch (Fig. 1)

Pull the trigger switch (B) to turn the motor on. Releasing the trigger turns the motor off. This tool has no provision to lock the switch in the on position, and the tool should never be locked on in any way.

DW369, DW367 specifications

The DeWalt DW367 and DW369 are two powerful tools in the extensive lineup of DeWalt’s woodworking and construction equipment. Designed with durability and performance in mind, these models deliver impressive features and advanced technologies to cater to both professional contractors and DIY enthusiasts.

The DeWalt DW367 is a lightweight, cordless saw designed for versatility and ease of use. One of its primary features is its high-performance 18V battery, which offers extended run time and rapid charging capabilities. This allows users to work longer without the interruption of frequent battery changes. The DW367 is equipped with a powerful motor that generates sufficient speed and torque, enabling it to cut through various materials, including wood, metal, and composites, with precision.

One of the standout technologies integrated into the DW367 is its ergonomic design. The saw comes with a comfortable grip that reduces fatigue during prolonged use, making it ideal for extensive projects. Additionally, the built-in LED light illuminates the cutting area, ensuring accuracy and visibility even in low-light conditions. The tool also features a tool-free blade change system, allowing users to switch blades quickly and efficiently without the need for additional tools.

On the other hand, the DeWalt DW369 is engineered for more demanding tasks. This model boasts advanced electronics that provide overload protection, preventing the motor from overheating and extending the tool's lifespan. It also offers a higher cutting capacity, making it suitable for thicker materials and more intricate cuts.

A notable characteristic of the DW369 is its adjustable bevel and depth cut features. These allow users to make precise bevel cuts and adjust the depth of the cut according to the material being worked with. This flexibility is essential for professionals who require accuracy and versatility in their work.

Both models leverage DeWalt's commitment to safety, incorporating an electric brake that instantly stops the blade upon disengaging the switch, minimizing the risk of accidents. Furthermore, each tool comes with a robust housing that enhances durability, ensuring they can withstand the rigors of job site conditions.

In summary, the DeWalt DW367 and DW369 are exemplary tools that combine power, versatility, and safety. With their advanced features and reliable technologies, both models can meet the diverse needs of users, making them invaluable additions to any workshop or job site. Their focus on user comfort and operational efficiency speaks to DeWalt's dedication to quality and innovation in the power tools industry.