Delta BS150LS instruction manual Failure to Follow These Rules MAY Result in Serious Injury

Page 3

GENERAL SAFETY RULES

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.

1.FOR YOUR OWN SAFETY, READ THE INSTRUCTION MANUAL BEFORE OPERATING THE MACHINE. Learning the machine’s application, limitations, and specific hazards will greatly minimize the possibility of accidents and injury.

2.WEAR EYE PROTECTION. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards, hearing equipment should comply with ANSI S3.19 standards, and dust mask protection should comply with MSHA/NIOSH certified respirator standards. Splinters, air-borne debris, and dust can cause irritation, injury, and/or illness.

3.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.

4.DO NOT USE THE MACHINE IN A DANGEROUS ENVIRONMENT. The use of power tools in damp or wet locations or in rain can cause shock or electrocution. Keep your work area well-lit to prevent tripping or placing arms, hands, and fingers in danger.

5.MAINTAIN ALL TOOLS AND MACHINES IN PEAK CONDITION. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. Poorly maintained tools and machines can further damage the tool or machine and/or cause injury.

6.CHECK FOR DAMAGED PARTS. Before using the machine, check for any damaged parts. Check for alignment of moving parts, binding of moving parts, breakage of parts, and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced. Damaged parts can cause further damage to the machine and/or injury.

7.KEEP THE WORK AREA CLEAN. Cluttered areas and benches invite accidents.

8.KEEP CHILDREN AND VISITORS AWAY. Your shop is a potentially dangerous environment. Children and visitors can be injured.

9.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure that the switch is in the “OFF” position before plugging in the power cord. In the event of a power failure, move the switch to the “OFF” position. An accidental start-up can cause injury.

10.USE THE GUARDS. Check to see that all guards are in place, secured, and working correctly to prevent injury.

11.REMOVE ADJUSTING KEYS AND WRENCHES BEFORE STARTING THE MACHINE. Tools, scrap pieces, and other debris can be thrown at high speed, causing injury.

12.USE THE RIGHT MACHINE. Don’t force a machine or an attachment to do a job for which it was not designed. Damage to the machine and/or injury may result.

13.USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by Delta may cause damage to the machine or injury to the user.

14.USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. See the Extension Cord Chart for the correct size depending on the cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

15.SECURE THE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. Loss of control of a workpiece can cause injury.

16.FEED THE WORKPIECE AGAINST THE DIRECTION OF THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE SURFACE. Feeding it from the other direction will cause the workpiece to be thrown out at high speed.

17.DON’T FORCE THE WORKPIECE ON THE MACHINE. Damage to the machine and/or injury may result.

18.DON’T OVERREACH. Loss of balance can make you fall into a working machine, causing injury.

19.NEVER STAND ON THE MACHINE. Injury could occur if the tool tips, or if you accidentally contact the cutting tool.

20.NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN THE POWER OFF. Don’t leave the machine until it comes to a complete stop. A child or visitor could be injured.

21.TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE POWER SOURCE before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. An accidental start-up can cause injury.

22.MAKE YOUR WORKSHOP CHILDPROOF WITH PADLOCKS, MASTER SWITCHES, OR BY REMOVING STARTER KEYS. The accidental start-up of a machine by a child or visitor could cause injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING, AND

USE COMMON SENSE. DO NOT USE THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICA- TION. A moment of inattention while operating power tools may result in injury.

24.THE DUST GENERATED BY CERTAIN WOODS AND WOOD PRODUCTS CAN BE INJURIOUS TO YOUR HEALTH. Always operate machinery in well-ventilated areas, and provide for proper dust removal. Use wood dust collection systems whenever possible.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Band Saw Safety Guidelines Definitions General Safety RulesImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Failure to Follow These Rules MAY Result in Serious InjuryAdditional Safety Rules for Band Saws Power ConnectionsMotor Specifications Extension Cords Grounding InstructionsUnpacking and Cleaning Carton ContentsFunctional Description Band SAW Assembly Parts Assembly Stand AssemblyBand SAW to Stand Assembly Assembling Table to Machine Page Stops Attaching Lamp to MachineStarting and Stopping SAW Operating Controls and AdjustmentsLocking Switch in the OFF Position Never Open the Door When the Machine is RunningTracking the Blade Adjusting Blade TensionAdjusting Upper Blade Guide Assembly Disconnect Machine from Power SourceAdjusting Upper Blade Guides and Blade Support Bearing Tilting the Table Adjusting Lower Blade Guides and Blade Support BearingAdjusting the Table Positive Stops Changing Blades Dust PortCarefully Turn the Blade Inside OUT Cutting Curves Using the Band SAWPage Probable Cause Remedy Troubleshooting GuideTrouble Blade will not Track Band SAW Blades Page Accessories MaintenanceCanadian PORTER-CABLE Delta Service Centers

BS150LS specifications

The Delta BS150LS is a highly regarded bandsaw that is designed to meet the demands of both professional woodworkers and hobbyists alike. Known for its robust construction and precision, this machine stands out in the market for its blend of power and versatility.

One of the main features of the Delta BS150LS is its powerful motor, which delivers ample cutting strength to handle a variety of materials, including hardwoods, softwoods, and even some non-ferrous metals. The motor has a horsepower rating that allows for smooth operation and ease of cutting without the need for excessive strain. This reliability in its operation makes it suitable for both intricate and heavy-duty cutting tasks.

Another notable characteristic of the BS150LS is its adequately sized cutting capacity. With a spacious table and substantial throat depth, users can tackle large workpieces with ease. The table itself can be adjusted to different angles, allowing for bevel cuts and providing enhanced flexibility for complex projects.

In terms of safety and convenience, the Delta BS150LS is equipped with features such as a blade guard and a quick-release tension lever. This enhances user safety while ensuring minimal downtime when changing blades. The machine is also designed with an integrated dust collection port, which helps maintain a cleaner workspace by minimizing sawdust accumulation.

The BS150LS incorporates advanced technology, including a precision ground cast iron table that provides a stable surface for accurate cutting. This is complemented by a robust frame that reduces vibration, thus enhancing the quality of the cuts and making the user experience smoother. Additionally, the bandsaw utilizes a well-engineered tracking system that ensures the blade remains aligned during operation, resulting in cleaner and more precise cuts.

Overall, the Delta BS150LS represents a perfect combination of power, precision, and safety features. It's ideal for users looking to elevate their woodworking capabilities, whether in a professional workshop or a home garage. With its reliable performance and versatile features, the BS150LS is a valuable addition to any woodworker’s toolkit.
Top Page Image Contents