Delta BS150LS instruction manual Adjusting the Table Positive Stops

Page 16

ADJUSTING THE TABLE

POSITIVE STOPS

Positive stops are provided for the table at the 90 and 45 degree angle to the blade. To check and adjust the positive stops:

DISCONNECT MACHINE FROM POWER SOURCE.

1.Tilt the table to the 90 degree position as shown in Fig. 32 and tighten lock handle (A). Place a square (H) on the table and against the blade and check to see if the blade is 90 degrees to the table surface. If an adjustment is necessary:

2.Tilt the table to expose the lock nut (E) Fig. 33. Loosen lock nut (E) and return table to the 90° position. With the lock handle (A) Fig. 32 loose, turn the adjusting screw (F) Fig. 34, using the 3mm hex wrench provided until the blade is 90 degrees to the table. Then tighten lock handle (A) and lock nut (E) on the adjustment screw

(F).

H

EF

A

Fig. 32

F

J

E

J N

Fig. 33

3.Tilt the table to the 45 degree position as shown in Fig. 34. Place a square (H) Fig. 34 on the table and against the blade and check to see if the blade is 45 degrees to the table surface. If an adjustment is necessary:

4.Loosen the lock nut (N) Fig. 33 on the adjustment screw (J) located on the underside of the table. With the lock handle (A) Fig. 34 loose, turn adjustment screw (J) using 3mm hex wrench provided until the blade is 45 degrees to the table. Tighten lock handle (A) and lock nut (N) on the adjustment screw (J).

H

F

J

A

Fig. 34

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Band Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Failure to Follow These Rules MAY Result in Serious Injury Stay ALERT, Watch What YOU are DOING,Power Connections Additional Safety Rules for Band SawsMotor Specifications Grounding Instructions Extension CordsCarton Contents Unpacking and CleaningFunctional Description Band SAW Assembly Parts Stand Assembly AssemblyBand SAW to Stand Assembly Assembling Table to Machine Page Attaching Lamp to Machine StopsOperating Controls and Adjustments Locking Switch in the OFF PositionNever Open the Door When the Machine is Running Starting and Stopping SAWAdjusting Blade Tension Adjusting Upper Blade Guide AssemblyDisconnect Machine from Power Source Tracking the BladeAdjusting Upper Blade Guides and Blade Support Bearing Adjusting Lower Blade Guides and Blade Support Bearing Tilting the TableAdjusting the Table Positive Stops Dust Port Changing BladesCarefully Turn the Blade Inside OUT Using the Band SAW Cutting CurvesPage Troubleshooting Guide Probable Cause RemedyTrouble Blade will not Track Band SAW Blades Page Maintenance AccessoriesCanadian PORTER-CABLE Delta Service Centers

BS150LS specifications

The Delta BS150LS is a highly regarded bandsaw that is designed to meet the demands of both professional woodworkers and hobbyists alike. Known for its robust construction and precision, this machine stands out in the market for its blend of power and versatility.

One of the main features of the Delta BS150LS is its powerful motor, which delivers ample cutting strength to handle a variety of materials, including hardwoods, softwoods, and even some non-ferrous metals. The motor has a horsepower rating that allows for smooth operation and ease of cutting without the need for excessive strain. This reliability in its operation makes it suitable for both intricate and heavy-duty cutting tasks.

Another notable characteristic of the BS150LS is its adequately sized cutting capacity. With a spacious table and substantial throat depth, users can tackle large workpieces with ease. The table itself can be adjusted to different angles, allowing for bevel cuts and providing enhanced flexibility for complex projects.

In terms of safety and convenience, the Delta BS150LS is equipped with features such as a blade guard and a quick-release tension lever. This enhances user safety while ensuring minimal downtime when changing blades. The machine is also designed with an integrated dust collection port, which helps maintain a cleaner workspace by minimizing sawdust accumulation.

The BS150LS incorporates advanced technology, including a precision ground cast iron table that provides a stable surface for accurate cutting. This is complemented by a robust frame that reduces vibration, thus enhancing the quality of the cuts and making the user experience smoother. Additionally, the bandsaw utilizes a well-engineered tracking system that ensures the blade remains aligned during operation, resulting in cleaner and more precise cuts.

Overall, the Delta BS150LS represents a perfect combination of power, precision, and safety features. It's ideal for users looking to elevate their woodworking capabilities, whether in a professional workshop or a home garage. With its reliable performance and versatile features, the BS150LS is a valuable addition to any woodworker’s toolkit.
Top Page Image Contents