Delta BS150LS instruction manual Changing Blades, Dust Port, Carefully Turn the Blade Inside OUT

Page 17

CHANGING BLADES

To change blades:

DISCONNECT MACHINE FROM POWER SOURCE.

1.Pull door latches (A) Fig. 35 and open doors (B).

2.Loosen the two screws (C) Fig. 36, and remove the blade guard (D).

3.To release tension on the band saw blade loosen screw (E) and turning tension knob (G) Fig. 35 counterclockwise.

4.Remove table alignment screw (F) Fig. 37.

5.Slip the blade off both wheels and guide it out through the slot in the table.

6.Check the new blade to make sure that the teeth will point down toward the table when installed. IF NOT,

CAREFULLY TURN THE BLADE INSIDE OUT.

7.Place the new blade onto wheels and adjust the blade tension, blade guides, and tracking as described previously in this manual.

8.Replace the blade guard, (removed in STEP 2), and the table alignment screw (removed in STEP 4). Tighten both securely.

ALWAYS MAKE SURE THE UPPER BLADE GUARD IS INSTALLED AND PROPERLY ADJUSTED BEFORE OPERATING THE BAND SAW.

9.Close the doors (B) Fig. 35 before operating saw.

10.To use the miter gage as shown in Fig. 40, insert the miter gage guide bar into miter gage slot (S) Fig. 37 and adjust it to the desired angle.

DUST PORT

A dust port (A) Fig. 38, is provided to connect your band saw to a standard shop vacuum or dust collector. The opening of the dust port is 2-1/4" I.D.

E G

A

B

A

Fig. 35

C D

Fig. 36

S

F

Fig. 37

A

Fig. 38

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Band Saw Important Safety Instructions Safety Guidelines DefinitionsGeneral Safety Rules Stay ALERT, Watch What YOU are DOING, Failure to Follow These Rules MAY Result in Serious InjuryMotor Specifications Additional Safety Rules for Band SawsPower Connections Extension Cords Grounding InstructionsFunctional Description Unpacking and CleaningCarton Contents Band SAW Assembly Parts Band SAW to Stand Assembly AssemblyStand Assembly Assembling Table to Machine Page Stops Attaching Lamp to MachineLocking Switch in the OFF Position Operating Controls and AdjustmentsNever Open the Door When the Machine is Running Starting and Stopping SAWAdjusting Upper Blade Guide Assembly Adjusting Blade TensionDisconnect Machine from Power Source Tracking the BladeAdjusting Upper Blade Guides and Blade Support Bearing Tilting the Table Adjusting Lower Blade Guides and Blade Support BearingAdjusting the Table Positive Stops Carefully Turn the Blade Inside OUT Changing BladesDust Port Cutting Curves Using the Band SAWPage Probable Cause Remedy Troubleshooting GuideTrouble Blade will not Track Band SAW Blades Page Accessories MaintenanceCanadian PORTER-CABLE Delta Service Centers

BS150LS specifications

The Delta BS150LS is a highly regarded bandsaw that is designed to meet the demands of both professional woodworkers and hobbyists alike. Known for its robust construction and precision, this machine stands out in the market for its blend of power and versatility.

One of the main features of the Delta BS150LS is its powerful motor, which delivers ample cutting strength to handle a variety of materials, including hardwoods, softwoods, and even some non-ferrous metals. The motor has a horsepower rating that allows for smooth operation and ease of cutting without the need for excessive strain. This reliability in its operation makes it suitable for both intricate and heavy-duty cutting tasks.

Another notable characteristic of the BS150LS is its adequately sized cutting capacity. With a spacious table and substantial throat depth, users can tackle large workpieces with ease. The table itself can be adjusted to different angles, allowing for bevel cuts and providing enhanced flexibility for complex projects.

In terms of safety and convenience, the Delta BS150LS is equipped with features such as a blade guard and a quick-release tension lever. This enhances user safety while ensuring minimal downtime when changing blades. The machine is also designed with an integrated dust collection port, which helps maintain a cleaner workspace by minimizing sawdust accumulation.

The BS150LS incorporates advanced technology, including a precision ground cast iron table that provides a stable surface for accurate cutting. This is complemented by a robust frame that reduces vibration, thus enhancing the quality of the cuts and making the user experience smoother. Additionally, the bandsaw utilizes a well-engineered tracking system that ensures the blade remains aligned during operation, resulting in cleaner and more precise cuts.

Overall, the Delta BS150LS represents a perfect combination of power, precision, and safety features. It's ideal for users looking to elevate their woodworking capabilities, whether in a professional workshop or a home garage. With its reliable performance and versatile features, the BS150LS is a valuable addition to any woodworker’s toolkit.
Top Page Image Contents