CARTON CONTENTS
1
12
3 | 6 | 8 | |
5 | 9 | ||
|
2
11
7 10
4
Fig. 1A
Fig. 1A Hardware
1.Saw unit
2.Legs
3.Shelf
4.Wheel assembly
5.Stock advance stop
6.Stand handle
7.Vertical table
8.Vise clamping handwheel
9.Floor mounting hardware
10.Pulley
11.Table support bracket
12.Pulley guard
8
14
Fig. 1B Hardware
2
3
9
5
10
1. | M6x10mm hex head screw |
2. | 6mm lock washer |
3. | M6 hex nut |
4. | |
5. | |
6. |
6 
11
7 
Fig. 1B
7. | 1/4” flat washer | |
8. | 5/32 hex wrench | |
9. | Cotter pin | |
10. | 5/16” washer | |
11. | ||
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
ASSEMBLY
FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE
INSTRUCTION MANUAL.
ASSEMBLY TOOLS REQUIRED
*5/32 hex wrench(supplied)
*10 mm, 12mm and 1/2 inch open end or socket wrenches (not supplied)
ASSEMBLY TIME ESTIMATE - 1 to 2 hours
8