Barco 26-0503000-00 manual MÉêÑçêãáåÖ=~=q~âÉ, MÉêÑçêãáåÖ=~=jìäíáJq~âÉ

5. GUI Installation and Operation

Using the Video Switching Tab

mÉêÑçêãáåÖ=~=q~âÉ

„On the Video Switching Tab, use the following steps to perform a take:

1.In the Outputs Section, click the output to which you want to route an input. The output button turns yellow.

Note

If an input is already associated with that output, the input number will appear within a bright green box in the Video column. If there is no input associated with the output, the output is “blanked” and the label “--” is shown.

2.In the Inputs Section, click the desired input source. The selected input button turns yellow, and its number appears in a bright red box in the Video column — adjacent to the selected output.

3.In the Inputs Section, click TAKE. The selected input number appears in a bright green box in the Video column — indicating an active route.

Note

When the route is completed, the Status Menu (if visible) and the appropriate input/output buttons on the physical MatrixPRO panel update accordingly.

4.Repeat from step 1 to perform another take. Please note the following important points:

•

•

To cancel a route before pressing TAKE, click the Cancel button in the Inputs Section, or click the selected input button to “de-select” it. The previous route remains in effect.

A “pending” route remains pending — even if you click a different output — until TAKE or Cancel is pressed. The bright red square always indicates a pending route.

mÉêÑçêãáåÖ=~=jìäíáJq~âÉ

This procedure enables you to perform multiple input-to-output routes with one “take.”

„On the Video Switching Tab, use the following steps to perform a multi-take:

1.In the Outputs Section, click the output to which you want to route an input. The output button turns yellow.

2.In the Inputs Section, click the desired input source. The selected input button turns yellow, and its number appears in a bright red box in the Video column — adjacent to the selected output.

3.Repeat steps 1 and 2 for as many input-to-output routes as desired.

4.In the Inputs Section, click TAKE. The selected input numbers appear in bright green boxes in the Video column — indicating active routes.

5.Repeat from step 1 to perform another multi-take.

66 MatrixPRO • 8x8 DVI Router • User’s Guide