5. GUI Installation and Operation
Control GUI Installation
`çåíêçä=drf=fåëí~ää~íáçå
The MatrixPRO 8x8 DVI Router Control GUI is an interactive Graphical User Interface application designed to assist users with MatrixPRO operation. The software is only available via download from either the Barco Folsom website or the FTP server.
Note
The MatrixPRO Control GUI software is included within the “System Software” download.
The following
Use the following steps to install the MatrixPRO control GUI:
Note
This procedure will not be required if you have already downloaded system software — for purposes of upgrading the MatrixPRO’s code. In this case, the GUI is automatically installed when you run the System Software executable.
1.Verify that your PC meets all hardware and software requirements for running the GUI. These are identical to the requirements for downloading software. In Chapter 6, refer to the “Hardware Requirements” section on page 78 and the “Software Requirements” section on page 78 for details.
2.Download the MatrixPRO software. In Chapter 6, refer to the “Downloading Software” section on page 79 for instructions.
3.With the download complete, navigate to the target folder and
4.Follow the prompts to install the upgrade package in the default folder. At the conclusion of the procedure, a new path will be created under Start > Programs > Barco Folsom.
54 |
| MatrixPRO • 8x8 DVI Router • User’s Guide |
|