Chicago Electric 42933 operating instructions For technical questions, please call

Page 8

14.Always use the anti-kickback finger attachment when making rip cuts. Feed stock from the opposite end from the anti-kickback finger attach- ment.

15.Only use 8 1/4” saw blades with 5/8” arbor on this machine.

16.Before making any adjustments to the Radial Arm Saw, the Switch should be in the OFF position and the Switch locked OFF.

17.Lock the carriage arm in place before lowering the saw blade. Otherwise, when the saw blade touches the stock, it may draw itself backward (with you) into the cutting area.

18.Do not cut more than one piece of stock at a time, for any type of cut.

19.When cross cutting, return the car- riage arm to the rear position before letting go of the Handle.

20.Do not use abrasive, cut off, or wire wheels.

21.Do not operate with ANY guard disabled, damaged, or removed. Moving guards must move freely and close in- stantly.

22.The use of accessories or attach- ments not recommended by the manufacturer may result in a risk of injury to persons.

23.When servicing use only identical replacement parts.

24.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breath- ing protection must be NIOSH-ap-

proved for the specific hazards in the work area.

25.Industrial applications must follow OSHA guidelines.

26.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement.

27.Avoid unintentional starting. Prepare to begin work before turning on the tool.

28.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure.

29.WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and ce- ment or other masonry products

Arsenic and chromium from chemi- cally treated lumber

Your risk from these exposures var- ies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)

30.WARNING: Handling the cord on this product will expose you to lead,

SKU 42933

For technical questions, please call 1-800-444-3353.

Page 8

Image 8
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents Save all warnings and instructions for future reference General Tool Safety WarningsSave This Manual Nameplate Extension Cord 25’ 50’ 100’ 150’Radial Arm Saw Safety Warnings Grounding InstructionsWith Three Prong Plugs 125 V~ 3-Prong Plug and OutletNot a safe method Essential Straight Push-stick Features Functions Diagram not to scaleHandle Notch Stick LengthFor technical questions, please call Vibration Safety Unpacking SpecificationsInstallation SKU For technical questions, please call Operating Controls For technical questions, please call Adjustments Cord to the Radial Arm SawCutting Kerf Marks Mitre Cross Cutting OperationCross Cutting Bevel Cross Cutting Compound Cross CuttingOut-Rip Cutting Maintenance Troubleshooting Problem Cause SolutionParts List Part Description ’tyAssembly Diagram Record Product’s Serial Number HereAssembly Diagram Limited 90 DAY Warranty