Craftsman 137.21236 Glossary of Terms, Compound Miter SAW Terms, Woodworking Terms

Page 11

GLOSSARY OF TERMS

COMPOUND MITER SAW TERMS

ARBOR LOCK – Allows the user to keep the blade from rotating while tightening or loosening the arbor bolt during blade replacement or removal.

BASE – Supports the table, holds accessories and allows for workbench or leg set mounting.

BEVEL LOCKING HANDLE – Locks the miter saw at a desired bevel angle.

BEVEL SCALE – To measure the bevel angle of the saw blade 0° to 45° left.

COVER PLATE SCREW – Loosen this screw and rotate the plate for access to the blade arbor bolt.

FENCE – Helps to keep the workpiece from moving when sawing. Scaled to assist with accurate cutting.

LOWER BLADE GUARD – Helps protect your hands from the blade in the raised position, it retracts as the blade is lowered.

MITER HANDLE – Used to rotate the table, and to rotate the saw to a right or left cutting position.

MITER SCALE – Measures the miter angle 0° to 45° left and right.

MOUNTING HOLES – To mount the miter saw to a stable surface.

ON/OFF TRIGGER SWITCH – To start the tool, squeeze the trigger. Release the trigger to turn off the miter saw.

POSITIVE STOP LOCKING LEVER – Locks the miter saw at a preset positive stop for the desired miter angle.

STOP LATCH – Locks the miter saw in the lowered position for compact storage and transportation.

SWITCH HANDLE – The switch handle contains the trigger switch and the laser on/off switch. The blade is lowered into the workpiece by pushing down on the handle. The saw will return to its upright position when the handle is released.

WARNING LABELS – Read and understand for your own safety. Make sure all labels are present

on machine and legible.

WRENCH STORAGE – Convenient storage to prevent misplacing the blade wrench.

WOODWORKING TERMS

ARBOR – The shaft on which a blade is mounted.

BEVEL CUT – An angle cut made through the face of the workpiece.

COMPOUND CUT – A simultaneous bevel and miter cut.

CROSS CUT – A cut made across the width of the workpiece.

FREEHAND – Performing a cut without using a fence (guide), hold down or other proper device to prevent the workpiece from twisting during the cutting operation.

GUM – A sticky sap from wood products.

HEEL – Misalignment of the blade.

KERF – The amount of material removed by blade cut.

MITER CUT – An angle cut made across the width of the workpiece.

RESIN – A sticky sap that has hardened.

REVOLUTIONS PER MINUTE (RPM) – The number of turns completed by a spinning object in one minute.

SAW BLADE PATH – The area of the workpiece or table top directly in line with the travel of the blade or the part of the workpiece which will be cut.

SET – The distance between two saw blade tips, bent outward in opposite directions to each other. The further apart the tips are, the greater the set.

WORKPIECE – The item being cut. The surfaces of a workpiece are commonly referred to as faces, ends and edges.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Sears, Roebuck and Co., Hoffman Estates, IL60179 USA Product Specifications Table of ContentsWarranty Support and Clamp Work SymbolsShown below are some of the symbols you may see ProhibitionPower Tool Safety Never Leave the Tool Running 24. ! DangerPower Supply and Motor Specifications Compound Miter SAW SafetySpecific Safety Instructions for this Compound Miter SAW Keep the Motor AIR Slots Clean and free of chips or dustGrounding Instructions Electrical Requirements and SafetyAccessories Recommended AccessoriesCarton Contents Know Your Compound Miter SAW Woodworking Terms Glossary of TermsCompound Miter SAW Terms Assembly and Adjustments Inserting and Replacing the Laser Batteries FIG. F Removing or Installing the BladeTo Adjust the Angle Installing Blade Fig. G, HAdjustment Instructions Adjusting Fence Squareness FIG. JCutting ARM Travel To Adjust the IndicatorCutting Arm Downward Travel Adjustment Bevel Stop Adjustment FIG. M, N, OMounting instructions Bevel Indicator Fig. NMounting the Miter SAW FIG. P, Q To avoid injury from unexpected saw movementAvoid Direct EYE Contact Laser Guide FIG. ROperation AdjustmentsEquirements and Safety Before Each USE Inspect Your SAW Keep Your Work Area CleanInspect Your Workpiece Dress for SafetyWhen SAW is Running Plan Your WorkMiter CUT FIG. U Body and Hand Position FIG. STurning SAW on FIG. T Before Leaving the SAWCutting Bowed Material FIG Bevel CUT FIGCompound CUT FIG. W Cutting Base Molding FIG. YFig. Z Bevel/Miter SettingsEmptying Sawdust BAG MaintenanceReplacing Carbon Brushes FIG. BB Lower Blade GuardProtection Troubleshooting GuideParts List for SAW Schematic Parts List10 in. Compound Miter SAW Model no Schematic for SAWParts List and Schematic for Motor Here’s what the Repair Protection Agreement* includes Repair Protection AgreementsGet it fixed, at your home or ours

137.21236 specifications

The Craftsman 137.21236 is a versatile and reliable tool that caters to both DIY enthusiasts and professional craftsmen alike. Designed to deliver precision and efficiency, this saw embodies the spirit of dependable craftsmanship that the Craftsman brand is known for.

One of the main features of the Craftsman 137.21236 is its robust and powerful motor. With a solid horsepower rating, it provides ample cutting power, making it ideal for a variety of woodworking tasks, including ripping, cross-cutting, and bevel cuts. This powerful motor allows users to effortlessly cut through different materials, including hardwoods, softwoods, and engineered wood products, ensuring versatility in various projects.

Another significant characteristic is its adjustable cutting depth and angle. The saw features a user-friendly bevel mechanism, allowing for precise adjustment of the cutting angle up to 45 degrees. This feature enhances usability when tackling angled cuts, dovetails, or compound miter cuts. Moreover, the cutting depth can be easily modified, enabling users to manage the thickness of the material being worked on, thus providing greater control and flexibility during operation.

The Craftsman 137.21236 also boasts an ergonomically designed handle, which not only improves comfort during extended use but also enhances control and reduces fatigue. The balanced weight distribution of the tool ensures stability, minimizing vibrations during operation for precise cuts.

In terms of safety, this model is equipped with an integrated blade guard and an electric brake, ensuring that it meets the safety standards expected of high-quality power tools. The blade guard prevents accidental contact with the blade, while the electric brake halts the blade's rotation almost instantaneously when the trigger is released, enhancing user safety during operation.

Furthermore, the Craftsman 137.21236 is compatible with a range of blades, allowing users to swap out blades according to the specific needs of their projects. Whether it's a fine-tooth blade for intricate cuts or a carbide-tipped blade for heavy-duty work, the compatibility adds another layer of versatility.

In summary, the Craftsman 137.21236 is a feature-rich and technologically advanced tool that embodies reliability and precision. Its powerful motor, adjustable features, ergonomic design, and focus on safety make it a valuable addition to any workshop, catering to the diverse needs of users, whether they are tackling home renovations or professional woodworking projects.
Top Page Image Contents