Craftsman 137.21236 operating instructions Power Tool Safety

Page 4

POWER TOOL SAFETY

GENERAL SAFETY INSTRUCTIONS BEFORE USING THIS POWER TOOL Safety is a combination of common sense, staying alert and knowing how to use your power tool.

!WARNING

To avoid mistakes that could cause serious injury, do not plug the tool in until you have read and understood the following.

1.READ and become familiar with the

entire Operator’s Manual. LEARN the tool’s application, limitations and possible hazards.

2.KEEP GUARDS IN PLACE and in working order.

3.REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning ON.

4.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

5.DO NOT USE IN DANGEROUS ENVIRONMENTS. Do not use power tools in damp locations, or expose them to rain or snow. Keep work area well lit.

6.KEEP CHILDREN AWAY. All visitors and bystanders should be kept a safe distance from work area.

7.MAKE WORKSHOP CHILD PROOF with padlocks, master switches or by removing starter keys.

8.DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for which it was designed.

9.USE THE RIGHT TOOL. Do not force the tool or an attachment to do a job for which it was not designed.

10.USE PROPER EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will result in a drop in line voltage and in loss of power which will cause the tool to overheat.

The table on page 7 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

11.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.

12.ALWAYS WEAR EYE PROTECTION. Any power tool can throw foreign objects

into the eyes and could cause permanent eye damage. ALWAYS wear Safety Goggles (not glasses)

that comply with ANSI Safety standard Z87.1. Everyday eyeglasses have only impact– resistant lenses. They ARE NOT safety glasses. Safety Goggles are available at Sears. NOTE: Glasses or goggles not in compliance with ANSI Z87.1 could seriously injure you when they break.

13.WEAR A FACE MASK OR DUST MASK. Sawing operation produces dust.

14.SECURE WORK. Use clamps or a vise to hold work when practical. It is safer

than using your hand and it frees both hands to operate the tool.

15.DISCONNECT TOOLS FROM POWER SOURCE before servicing, and when changing accessories such as blades, bits and cutters.

16.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in the OFF position before plugging the tool in.

17.USE RECOMMENDED ACCESSORIES. Consult this Operator’s Manual for recommended accessories. The use of improper accessories may cause risk of injury to yourself or others.

18.NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Sears, Roebuck and Co., Hoffman Estates, IL60179 USA Warranty Table of ContentsProduct Specifications Symbols Shown below are some of the symbols you may seeProhibition Support and Clamp WorkPower Tool Safety 24. ! Danger Never Leave the Tool RunningCompound Miter SAW Safety Specific Safety Instructions for this Compound Miter SAWKeep the Motor AIR Slots Clean and free of chips or dust Power Supply and Motor SpecificationsElectrical Requirements and Safety Grounding InstructionsRecommended Accessories AccessoriesCarton Contents Know Your Compound Miter SAW Compound Miter SAW Terms Glossary of TermsWoodworking Terms Assembly and Adjustments Removing or Installing the Blade Inserting and Replacing the Laser Batteries FIG. FInstalling Blade Fig. G, H Adjustment InstructionsAdjusting Fence Squareness FIG. J To Adjust the AngleTo Adjust the Indicator Cutting Arm Downward Travel AdjustmentBevel Stop Adjustment FIG. M, N, O Cutting ARM TravelBevel Indicator Fig. N Mounting the Miter SAW FIG. P, QTo avoid injury from unexpected saw movement Mounting instructionsLaser Guide FIG. R Avoid Direct EYE ContactAdjustments Equirements and Safety Before Each USE Inspect Your SAWKeep Your Work Area Clean OperationDress for Safety When SAW is RunningPlan Your Work Inspect Your WorkpieceBody and Hand Position FIG. S Turning SAW on FIG. TBefore Leaving the SAW Miter CUT FIG. UBevel CUT FIG Compound CUT FIG. WCutting Base Molding FIG. Y Cutting Bowed Material FIGBevel/Miter Settings Fig. ZMaintenance Replacing Carbon Brushes FIG. BBLower Blade Guard Emptying Sawdust BAGTroubleshooting Guide ProtectionParts List Parts List for SAW SchematicSchematic for SAW 10 in. Compound Miter SAW Model noParts List and Schematic for Motor Repair Protection Agreements Here’s what the Repair Protection Agreement* includesGet it fixed, at your home or ours

137.21236 specifications

The Craftsman 137.21236 is a versatile and reliable tool that caters to both DIY enthusiasts and professional craftsmen alike. Designed to deliver precision and efficiency, this saw embodies the spirit of dependable craftsmanship that the Craftsman brand is known for.

One of the main features of the Craftsman 137.21236 is its robust and powerful motor. With a solid horsepower rating, it provides ample cutting power, making it ideal for a variety of woodworking tasks, including ripping, cross-cutting, and bevel cuts. This powerful motor allows users to effortlessly cut through different materials, including hardwoods, softwoods, and engineered wood products, ensuring versatility in various projects.

Another significant characteristic is its adjustable cutting depth and angle. The saw features a user-friendly bevel mechanism, allowing for precise adjustment of the cutting angle up to 45 degrees. This feature enhances usability when tackling angled cuts, dovetails, or compound miter cuts. Moreover, the cutting depth can be easily modified, enabling users to manage the thickness of the material being worked on, thus providing greater control and flexibility during operation.

The Craftsman 137.21236 also boasts an ergonomically designed handle, which not only improves comfort during extended use but also enhances control and reduces fatigue. The balanced weight distribution of the tool ensures stability, minimizing vibrations during operation for precise cuts.

In terms of safety, this model is equipped with an integrated blade guard and an electric brake, ensuring that it meets the safety standards expected of high-quality power tools. The blade guard prevents accidental contact with the blade, while the electric brake halts the blade's rotation almost instantaneously when the trigger is released, enhancing user safety during operation.

Furthermore, the Craftsman 137.21236 is compatible with a range of blades, allowing users to swap out blades according to the specific needs of their projects. Whether it's a fine-tooth blade for intricate cuts or a carbide-tipped blade for heavy-duty work, the compatibility adds another layer of versatility.

In summary, the Craftsman 137.21236 is a feature-rich and technologically advanced tool that embodies reliability and precision. Its powerful motor, adjustable features, ergonomic design, and focus on safety make it a valuable addition to any workshop, catering to the diverse needs of users, whether they are tackling home renovations or professional woodworking projects.
Top Page Image Contents