Craftsman 137.21236 Body and Hand Position FIG. S, Turning SAW on FIG. T, Before Leaving the SAW

Page 20

BODY AND HAND POSITION (FIG. S)

!WARNING

Never place hands near the cutting area. Proper positioning of your body and hands when operating the miter saw will make cutting easier and

safer. Keep children away. Keep all visitors at a safe distance from the miter saw. Make sure bystanders are clear of the saw and workpiece. Don’t force the saw. It will do the job better and safer at its designed rate.

Starting a cut:

●Place hands at least 6-3/4 in. away from the path of the blade – out of the “no-hands zone”

(1). (Fig. S)

●Hold workpiece firmly against the fence to prevent movement toward the blade.

●With the power switch OFF, bring the saw blade down to the workpiece to see the cutting path of the blade.

●Press in lock-off switch in trigger switch handle.

●Squeeze trigger switch to start saw.

●Lower blade into workpiece with a firm downward motion.

Finishing a cut:

●Hold the cutting arm in the down position.

●Release trigger switch and wait for all moving parts to stop before moving your hands and raising the cutting arm.

●If the blade doesn’t stop within 6 seconds, unplug the saw and follow the instructions in TROUBLESHOOTING GUIDE section.

Before freeing jammed material:

●Release trigger switch.

●Wait for all moving parts to stop.

●Unplug the miter saw.

Fig. S

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6-3/4 in.

6-3/4 in.

TURNING SAW ON (FIG. T)

To reduce the likelihood of accidental starting, a thumb activated lock-OFF switch is located on top of the switch handle. The lock-OFF switch (1) must be pushed in before the trigger switch (2) can be activated and the miter saw started.

!WARNING

Make the switch child-proof. Insert a padlock through the hole (3) in the trigger switch and lock it. This will prevent children and other unauthorized users from engaging the trigger switch ON.

Fig. T

2

1

3

BEFORE LEAVING THE SAW

●Never leave tool running unattended. Turn power OFF. Wait for all moving parts to stop and unplug unit from power source.

●Make workshop child- proof. Lock the shop. Disconnect master switches. Store tool away from children and other unqualified users.

MITER CUT (FIG. U)

1.When a miter cut is required, unlock the miter table by turning the miter handle (1) counterclockwise.

2.While holding the miter handle, press down on the positive stop locking lever (2) to disengage the positive stop locking lever.

3.Rotate the miter table to the right or left with the miter handle.

4.When the table is in the desired position as shown on the miter scale (3), release the positive stop locking lever handle and tighten the miter handle. The table is now locked at the desired angle. Positive stops are provided at 0°,15°, 22.5°, 31.6° and 45°.

IMPORTANT: ALWAYS TIGHTEN the miter table lock handle before cutting.

Fig. U

3

2 1

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Sears, Roebuck and Co., Hoffman Estates, IL60179 USA Product Specifications Table of ContentsWarranty Symbols Shown below are some of the symbols you may seeProhibition Support and Clamp WorkPower Tool Safety 24. ! Danger Never Leave the Tool RunningCompound Miter SAW Safety Specific Safety Instructions for this Compound Miter SAWKeep the Motor AIR Slots Clean and free of chips or dust Power Supply and Motor SpecificationsElectrical Requirements and Safety Grounding InstructionsRecommended Accessories AccessoriesCarton Contents Know Your Compound Miter SAW Woodworking Terms Glossary of TermsCompound Miter SAW Terms Assembly and Adjustments Removing or Installing the Blade Inserting and Replacing the Laser Batteries FIG. FInstalling Blade Fig. G, H Adjustment InstructionsAdjusting Fence Squareness FIG. J To Adjust the AngleTo Adjust the Indicator Cutting Arm Downward Travel AdjustmentBevel Stop Adjustment FIG. M, N, O Cutting ARM TravelBevel Indicator Fig. N Mounting the Miter SAW FIG. P, QTo avoid injury from unexpected saw movement Mounting instructionsLaser Guide FIG. R Avoid Direct EYE ContactAdjustments Equirements and Safety Before Each USE Inspect Your SAWKeep Your Work Area Clean OperationDress for Safety When SAW is RunningPlan Your Work Inspect Your WorkpieceBody and Hand Position FIG. S Turning SAW on FIG. TBefore Leaving the SAW Miter CUT FIG. UBevel CUT FIG Compound CUT FIG. WCutting Base Molding FIG. Y Cutting Bowed Material FIGBevel/Miter Settings Fig. ZMaintenance Replacing Carbon Brushes FIG. BBLower Blade Guard Emptying Sawdust BAGTroubleshooting Guide ProtectionParts List Parts List for SAW SchematicSchematic for SAW 10 in. Compound Miter SAW Model noParts List and Schematic for Motor Repair Protection Agreements Here’s what the Repair Protection Agreement* includesGet it fixed, at your home or ours

137.21236 specifications

The Craftsman 137.21236 is a versatile and reliable tool that caters to both DIY enthusiasts and professional craftsmen alike. Designed to deliver precision and efficiency, this saw embodies the spirit of dependable craftsmanship that the Craftsman brand is known for.

One of the main features of the Craftsman 137.21236 is its robust and powerful motor. With a solid horsepower rating, it provides ample cutting power, making it ideal for a variety of woodworking tasks, including ripping, cross-cutting, and bevel cuts. This powerful motor allows users to effortlessly cut through different materials, including hardwoods, softwoods, and engineered wood products, ensuring versatility in various projects.

Another significant characteristic is its adjustable cutting depth and angle. The saw features a user-friendly bevel mechanism, allowing for precise adjustment of the cutting angle up to 45 degrees. This feature enhances usability when tackling angled cuts, dovetails, or compound miter cuts. Moreover, the cutting depth can be easily modified, enabling users to manage the thickness of the material being worked on, thus providing greater control and flexibility during operation.

The Craftsman 137.21236 also boasts an ergonomically designed handle, which not only improves comfort during extended use but also enhances control and reduces fatigue. The balanced weight distribution of the tool ensures stability, minimizing vibrations during operation for precise cuts.

In terms of safety, this model is equipped with an integrated blade guard and an electric brake, ensuring that it meets the safety standards expected of high-quality power tools. The blade guard prevents accidental contact with the blade, while the electric brake halts the blade's rotation almost instantaneously when the trigger is released, enhancing user safety during operation.

Furthermore, the Craftsman 137.21236 is compatible with a range of blades, allowing users to swap out blades according to the specific needs of their projects. Whether it's a fine-tooth blade for intricate cuts or a carbide-tipped blade for heavy-duty work, the compatibility adds another layer of versatility.

In summary, the Craftsman 137.21236 is a feature-rich and technologically advanced tool that embodies reliability and precision. Its powerful motor, adjustable features, ergonomic design, and focus on safety make it a valuable addition to any workshop, catering to the diverse needs of users, whether they are tackling home renovations or professional woodworking projects.
Top Page Image Contents