Craftsman 113.2472T0 owner manual Flanged

Page 14

7.Carefully position the motor so that the poly "V" belt is around the motor pulley and the four motor studs align with the slots in the motor mount.

8, Push motor studs through and install the flanged lock nuts to the three (3) motor studs with spacers. Start the flanged nuts by hand only at this time.

9.Install the threaded stud through the hole in the

lower leg of the motor mount and over the motor stud as shown.

t II/

\

MOTOR MOUNT

MOTOR MOUNT

THREADED STUD

MOTOR MOUNT

10.Install a flanged lock nut onto this motor stud.

Tighten the flanged lock nuts, using a 3/8-inch wrench, until almost tight.

NOTE: Do not over-tighten the flange nuts. The motor should slide in the grooves to allow tensioning of the belt.

11.Install the wing nut on the threaded stud.

12.Check that the poly "V" belt is on both pulleys being sure that it is centered on each pulley.

13.Check that the pulleys are in line by sighting down the side of the large pulley to see if it lines up with the small pulley. If the pulleys are not in line, loosen the set screw holding the pulley on the motor shaft and position the pulley, A notch in the small end of the motor support is provided for access to the set screw and belt.

FLANGED

LLEY

ACCESS

FLANGED LOCK NUT

WING NUT

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Crrftsmrn Keep Work Area Clean Full ONE Year Warranty on Craftsman Band SAWKnow Your Power Tool Ground ALL Tools USE Recommended Accessories Never Stand on ToolWhen Installing or Moving the SAW Additional safety instructions for band sawBefore Using the SAW Before Each USEWhenever SAW is Running AccessoriesBefore Sanding Table of contents Glossary of terms for woodworkingModel NO.MODEL no Power SupplyMotor Safety Protection Unpacking and checking contents Table of Loose Parts One carton and includes steel legsDescription QTY List of Loose Parts in BAG #507657List of Loose Parts in BAG #507655 List of Loose Parts in BAG #507755Ware Assembly and alignmentAssembling LEG SET Assembling Cabinet EASKI. .T Mounting the Motor Flanged Connecting the Motor Belttensioningis doneby tighteningthe wingFrom loose parts bag find the following hard- ware Mounting the SAW to the LEG SETMounting the SAW to the Cabinet Attaching the Handwheel Attaching Trim Caps & Trim LedgeLocation and function of controls Getting to Know Your Band SAWInstalling the Blade UpperbladeAligning the Blade and Blade Guide Assemblies Blade Guide Gullet Backup Bearing Mounting the Front Table LAD ETable Leveling Setscrews Squaring the Blade to the Table Tilting Head for Bevel CUT ON-OFF SwitchAdjusting Bevel Lock Knob Blade Size Basic band saw operationCircle Cutting InchesInstalling Sanding Attachment Sawdust CollectionRecommended accessories Installing the Sanding BeltAdjusting the Upper Blade Guide Travel MaintenanceAdjusting Band SAW Bevel Travel Probable Cause Remedy Trouble shootingOutlet Before Trouble Shooting Your Band SAW/SANDER Probable Cause Trouble Shooting -- MotorTrouble Parts List for Craftsman 12-INCH Band Saws Models 113.247210Key Part Description Parts List for Craftsman 12-INCH Band SawsAlways order by Part Number Not by Key Number Parts List for Craftsman 12-INCH Band Saws Parts List for Craftsman 12-1NCH Band Saws Base Components26 \ Bevel Drive and Motor Mount Assembly Parts Parts List for Craftsman 12 Band SAW Always order by Part Number Not by Key Number DescriptionParts UST LEG SET Partnumber Band SAW with LEG SETBand SAW with Cabinet Partdescription

113.2472T0 specifications

The Craftsman 113.2472T0 is a benchtop table saw that stands out for its solid construction and versatile functionality, making it a favorite among both professional woodworkers and DIY enthusiasts. Its performance is bolstered by a robust 15-amp motor, providing enough power to handle various cutting tasks effectively. This motor allows the saw to deliver up to 5,000 RPM, ensuring clean and efficient cuts through different types of wood materials.

One of the main features of the Craftsman 113.2472T0 is its precision and accuracy. It comes equipped with a reliable rip fence system that can be easily adjusted for accurate cuts. The fence locks securely in place, reducing the likelihood of misalignment during use. Additionally, the saw includes a 10-inch carbide-tipped blade, which not only enhances durability but also improves cutting efficiency. The blade can be angled for precise bevel cuts, extending the tool's versatility for various woodworking projects.

Safety is a paramount concern in any workshop, and the Craftsman 113.2472T0 integrates several safety features to protect its users. The blade guard system not only shields the user from potential hazards but also allows for easy visibility of the cutting area. A push stick is included, enabling safe handling of smaller workpieces. Furthermore, the saw’s base is designed to provide stability, reducing vibration and ensuring a safe working environment.

In terms of portability, the Craftsman 113.2472T0 is designed with user convenience in mind. It features a compact design, which makes it easy to transport and store, whether in a dedicated workshop or a makeshift setup. The onboard storage for accessories keeps everything organized and within reach, streamlining the woodworking process.

The table itself is constructed from high-quality materials, offering excellent support and a smooth surface for woodworking tasks. With extensions available, the table size can be increased to accommodate larger materials, making it suitable for bigger projects. Overall, the Craftsman 113.2472T0 combines power, precision, and portability, making it an outstanding option for anyone needing a reliable and versatile table saw in their woodworking arsenal.
Top Page Image Contents