Stow manual SHS62A CUT-OFF SAW Rules for Safe Operation, General Safety

Page 9

SHS62A CUT-OFF SAW — RULES FOR SAFE OPERATION

General Safety

ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate this equipment.

ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the saw.

ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw.

ALWAYS inspect the blade, flanges and shafts for damage before installing the blade.

ALWAYS use high-speed, reinforced, abrasive blades - 1/8" (3.17 mm) thick (minimum) or high-speed, diamond blades specifically rated with a maximum operating speed of at least 5,400 RPM on 14" (350 mm) or 6,200 RPM on 12" (300 mm).

ALWAYS use high-speed reinforced, abrasive blades or high-speed, diamond blades marked with a 1" (25.4 mm) hole for a 1" (25.4 mm) flange, or a 20 mm hole for a 20 mm flange.

ALWAYS use abrasive blades or high-speed diamond blades marked for use with gasoline-powered, hand-held, portable, abrasive cutting-off saws.

ALWAYS read all safety materials and instructions that accompany any blade used with this saw.

ALWAYS inspect each blade carefully before using it.If there are any signs of damage or unusual wear, DO NOT USE

THE BLADE.

ALWAYS verify the blade arbor hole matches the saw's spindle before mounting the blade.

ALWAYS mount the blade solidly and firmly. Wrench tighten the arbor nut.

ALWAYS make sure the blade and flanges are clean and free of dirt and debris before mounting the blade on the saw.

ALWAYS use the correct blade for the type of work being done. Check with blade manufacturer if you do not know if blade is correct for desired application.

ALWAYS hold the saw with both hands when the engine is running. Use a firm grip with thumbs and fingers encircling the handles.

ALWAYSkeep all parts of the body away from the cutting-off blades when the engine is running.

ALWAYS keep the handles dry, clean and free of oil or fuel.

ALWAYS carry the saw with the engine stopped and the muffler away from the body.

ALWAYS instruct bystanders on where to stand while the saw is in operation.

ALWAYS clear the work area of unnecessary people.

NEVER allow anyone to stand in front of or behind the blade while the engine is running.

ALWAYS make sure the blade is not contacting any objects before starting the engine.

ALWAYS check for buried electrical cables before sawing. If unsure, contact the local utilities.

ALWAYS have all service and maintenance performed by competent trained service personnel.

ALWAYS clean the saw after each day’s use.

ALWAYS have a copy of this manual at the job site.

ALWAYS stop the engine before servicing, adding fuel and oil.

ALWAYS service air cleaner frequently to prevent carburetor malfunction.

ALWAYS keep clear of rotating or moving parts while the saw is in operation.

ALWAYS maintain this saw in a safe operating condition at all times.

ALWAYS keep any inexperienced and unauthorized people away from the saw at all times.

ALWAYS store saw properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

This saw is designed for certain

NOTE applications only. DO NOT use or modify this saw for any application otherthanforwhichitwas designed.

SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 9

Image 9
Contents SideWinder Page Page SHS62A CUT-OFF SAW Table of Contents SHS62A CUT-OFF SAW Parts Ordering Procedures SHS62A CUT-OFF SAW Safety Message Alert Symbols SHS62A CUT-OFF SAW Safety Message Alert Symbols Always wear approved eye and hearing protectionRotating blade can cut and crush. Keep hands and feet clear SHS62A CUT-OFF SAW Rules for Safe Operation SHS62A CUT-OFF SAW Rules for Safe Operation General SafetyDiamond Blade Safety Saw Transportation SafetyNever use carbide-tipped or toothed type blades of any kind Always know the location of the nearest first aid kit SHS62A CUT-OFF SAW Rules for Safe OperationDimensions LxWxH DisplacementEngine Type Engine Speed 10,000Machine Operation And Safety Decals SHS62A CUT-OFF SAW Decal Placement10 9 8 7 6 SHS62A CUT-OFF SAW Controls & Components Blade shaft SHS62A CUT-OFF SAW Blade Installation InstructionsFasten the clamp to the Roller Bar Support Arm SHS62A CUT-OFF SAW Water KIT Installation InstructionsDiamond Blade SHS62A CUT-OFF SAW BladesSHS62A CUT-OFF SAW Initial START-UP/OPERATION Place the engine ON/OFF switch in the on positionFuel Check StartingShut-down SHS62A CUT-OFF SAW Initial START-UP/OPERATIONKnob Belt Changing ProcedureCover Guard Until the V-belt is completely slackedRe-install the guard SHS62A CUT-OFF SAW MaintenanceV-belt should remain in tension Tensioning positionReversing the Cutting Arm Procedure Re-attach the cover guard Cam .The V-belt should remain in tensionAir/Fuel Filter Maintenance Procedures SHS62A CUT-OFF SAW Maintenance AIR/FUEL FilterSHS62A CUT-OFF SAW Troubleshooting Blade Troubleshooting Engine SHS62A CUT-OFF SAW Troubleshooting EngineSpark plug heat value improper? Troubleshooting EngineIncludes 1 ea SHS62A CUT-OFF SAW Filter KitsNO. Column SHS62A CUT-OFF SAW Explanation of Parts Section RemarksPart NO. Column QTY. ColumnTo 3 Units SHS62A CUT-OFF SAW Suggested Spare PartsSHS62A CUT-OFF SAW Muffler Assy Part Name SHS62A CUT-OFF SAW Recoil Start Assy HANDLE, Starter Rope SHS62A CUT-OFF SAW Crankcase Assy Plate SHS62A CUT-OFF SAW V-BELT Cover Clutch Side Assy SHS62A CUT-OFF SAW V-BELT Cover Clutch Side Assy SHS62A CUT-OFF SAW V-BELT Cover Pulley /BLADE Guard Part Name QTY SHS62A CUT-OFF SAW Fuel Tank Assy Part Name QTY Remarks SHS62A CUT-OFF SAW Lifting Handle and Roller Assy SHS62A CUT-OFF SAW Lifting Handle and Roller Assy SHS62A CUT-OFF SAW -THROTTLE Linkage Assy Spring SHS62A CUT-OFF SAW Flywheel Cover Assy WASHER, Flat SHS62A CUT-OFF SAW Flywheel Assy Pawl SET SHS62A CUT-OFF SAW Ignition Coil Assy Spring Spark Plug SHS62A CUT-OFF SAW AIR Filter Assy FLANGE, PRE- FILTER, CAP SHS62A CUT-OFF SAW Carburetor Mounting Assy Carburetor Mounting Assy SHS62A CUT-OFF SAW Carburetor Assy Throttle Shaft SHS62A CUT-OFF SAW Crankshaft / Piston Assy SHS62A CUT-OFF SAW Crankshaft and Piston Assy SHS62A CUT-OFF SAW Water KIT Assy VALVE, SHUT-OFF SHS62A CUT-OFF SAW Tools 00325 HS4191240SHS62A CUT-OFF SAW Recommended Diamond Blades Recommended Diamond Blades For Your Side Winder SawTerms and Conditions of Sale Parts Terms and Conditions of SaleHeres HOW to GET Help