Panasonic SC-AK640 Recording, Other basic operations, Erasure prevention

Cassette tape – Play and record (Continued)

2 Press [0 OPEN] for DECK 1 or [OPEN 0] for DECK 2 and insert the cassette.

Insert with the side to be played facing towards you and the exposed tape facing down. Close the holder by hand.

Front side

3 Press [3, TAPE] to start play.

To	Action
stop tape playback	Press [ 7, STOP].
fast-forward and	Press [4/ REW / ] or [ / FF / ¢].
rewind
select between	Press [DECK 1/2] (remote control :
loaded decks	[PLAY MODE]).

Note:

•Tape playback is momentarily interrupted if you open the other deck.

•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.

•Tape slack can get caught up in the mechanism and should be wound up before the tape is played.

•Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

Recording

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.

Preparation

Wind up the leader tape so recording can begin immediately.

1 Press [OPEN 0] for DECK 2 and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the exposed tape facing down.

2 Select the source to be recorded. Radio recording:

Tune in the station. (\ page 12)

Disc recording:

➀Insert the disc(s) you want to record. Press [6, CD] and then [7, STOP].

➁Prepare the desired disc recording mode.

ToAction

record

programmed

tracks Perform steps 2 to 4 in “Program play” (\ page 8).

Perform steps 3 to 6 in “Program play” (\ page 8).

By remote control only
record	1) Press [DISC] and then [1] ~ [5] to select
specifi c	the disc.
discs/tracks	Ensure disc is stopped.	ENGLISH
	2) Press [PLAY MODE] to select the desired
	mode (\ page 7).
	3)
	For 1-ALBUM mode and 1-SONG mode:
	Press [ALBUM ( or )] to select the
	album.

For 1-SONG mode:

Press [4, REW /] or [¢, / FF] to select the track.

Tape-to-tape recording:

➀Press [3, TAPE] and then [7, STOP].

➁Press [0 OPEN] for DECK 1 and insert the cassette to record.

3 Press [¶, REC] to start recording.			DANSK
Other basic operations
	To	Action
	stop recording	Press [7, STOP].
	record on the other	Turn the cassette over and press [¶, REC].
	side of the tape
	erase a recorded	1) Press [3, TAPE] and then [7, STOP].
	sound	2) Insert the recorded cassette into
		DECK 2. Ensure there is no cassette in	FRANÇAIS
• You cannot open DECK 1 while recording.
		DECK 1.

3) Press [¶, REC].

Note:

• Changes to volume and sound adjustments quality do not affect recording.

• You cannot fast-forward or rewind one deck while recording with the other.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.

Side A	LANG - 4
Tab for side B Tab for side A
To re-record
Normal cassette
Adhesive tape
	LANG - 5
	RQTV0071

11

RQT8043