Panasonic SC-AK640 Timer, Setting the clock, Using the play or record timer, Displaying the clock

Timer

Setting the clock

This is a 12-hour clock.

1 Press and hold [– CLOCK/TIMER] to select “CLOCK”.

Each time you press and hold the button:

CLOCK ➞ ˚ PLAY ➞ ˚ REC

Original display

2 ( Within 8 seconds or so )

Press [4, REW /] or [¢ , / FF] to set the time.

3 Press and hold [– CLOCK/TIMER] to finish setting the time.

Displaying the clock

Press and hold [– CLOCK/TIMER] once when the unit is on or in standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or music port source (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer	Action
Play timer	Prepare the music source you want to listen to;
	cassette (DECK 2 has the priority), disc number
	(1~5), radio or music port source, and set the
	volume.
Record	Check the cassette’s erasure prevention tabs
timer	(\ page 11), insert the cassette in DECK 2 and
	tune to the radio station (\ page 12) or select the
	music port source (\ page 15).

1	Press and hold [– CLOCK/TIMER] to select the timer
	function.
	Each time you press and hold the button:
		CLOCK ➞ ˚ PLAY			➞ ˚ REC
			Original display
	˚PLAY : to set the play timer
	˚REC : to set the record timer
	(Proceed to the next step			within 8 seconds		)
2	Press [4, REW / ] or [¢ ,				/ FF] to set the
	starting time.

Play timer indicator

Start time

4 Repeat steps 2 to 3 to set the finishing time.

Finish time

To activate the timer

5 Press and hold [– ˚PLAY/REC] to turn on your desired timer.

˚ PLAY ➞ ˚ REC

no display (off)

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To	Action
change the	Repeat steps 1 to 4 and 6 (\ see left and
settings	above).
change the	1) Press and hold [– ˚PLAY/REC] to clear the
source or	timer indicator from the display.
volume	2) Make changes to the source or volume.
	3) Do steps 5 to 6 (\ see above).
check the	Press and hold [– CLOCK/TIMER] successively
settings	to select ˚PLAY or ˚REC.
cancel	Press and hold [– ˚PLAY/REC] to clear the
	timer indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before turning the unit off.

Note:

•The play timer will start at the preset time with volume increasing gradually to preset level.

•The record timer will start 30 seconds before the set time with the volume muted.

•The timer comes on at the set time everyday if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, just activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

ENGLISH

DANSK

FRANÇAIS

LANG - 4

Record timer indicator

3 Press and hold [– CLOCK/TIMER] to confirm.

LANG - 5

RQTV0071

13

RQT8043