Graco 310692C Connecting the fluid hose, Connecting the fluid supply, Positioning the Air Cap

Connecting the fluid hose

(Pressure feed guns only)

1.To control fluid pressure to the gun, install a fluid regulator on the fluid line.

2.Connect the fluid hose (J) to the gun fluid inlet (B) 3/8-18 npsm [R 3/8-19] compound thread.

B

J

ti4854a

FIG. 5

Setup

Connecting the fluid supply

For packages that include fluid cups, use the following chart for installation instructions.

Cup attachment	Instruction Manual
3M PPS	310693
Gravity Cup	308792
Siphon Cup	308792
Pressure Cups	308791

Positioning the Air Cap

Rotate the air cap as needed to achieve the desired spray pattern direction. To create a round pattern, turn the pattern air off by turning the pattern adjustment knob (25) fully clockwise. See FIG. 7.

3.Connect the other end of the fluid hose (J) to a regu- lated fluid supply line.

ti4839a

FIG. 6

10 310692C