Setup | Graco 262906 specs

Setup

1.Connect Graco airless hose to sprayer. Tighten securely.

ti20402a

2. Connect other end of hose to gun.

ti20401a

3. Tighten securely.

ti20415a

4. Remove tip guard.

ti20408a

5. Check inlet strainer for clogs and debris.

ti5301a

6.Fill throat packing nut with TSL to prevent premature packing wear. Do this each time you spray.

ti5735b ti3307a

7. Turn power OFF.

ti5316a

/&&

8.Plug power supply cord into a properly grounded electrical outlet.

TIA

9. Turn prime valve down.

ti20406a

10.Place siphon tube set in grounded metal pail partially filled with flushing fluid. See Grounding, page 7. Do steps 1- 6 of Startup, page 9, to flush out storage oil shipped in sprayer. Use water to flush water-based paint or mineral spirits to flush oil-based paint and storage oil.

Flush

ti5856a

332161A