Graco 1030 dimensions Equipment Misuse Hazard

Page 4

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

INSTRUCTIONS D Read all instruction manuals, tags, and labels before operating the equipment.

DUse equipment only for its intended purpose. Call your Graco distributor for information.

DDo not exceed the maximum working pressure or temperature rating of the lowest rated system component. This gun has a 150 psi (10 bar) maximum fluid working pressure at a 125 psi (9 bar) maximum incoming air pressure. Read Technical Data in all equipment manuals.

DDo not alter or modify equipment.

DCheck equipment daily. Repair or replace worn or damaged parts immediately. D Do not lift pressurized equipment.

DRoute the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below --40_F (--40_C).

DDo not use hoses to pull equipment.

DKeep children and animals away from work area. D Comply with all applicable safety regulations.

DDo not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in this equipment, which contains aluminum and/or zinc parts. Such use could result in a serious chemical reaction, with the possibility of explosion, which could cause death, serious injury and/or substantial property damage.

DWear eye and ear protection when operating this equipment. Keep body parts away from front of gun. See Sound Data in TECHNICAL DATA.

TOXIC FLUID HAZARD

Toxic fluid or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

DRead MSDS’s to know the specific hazards of the fluids you are using.

DStore hazardous fluid in approved containers and dispose of it according to all applicable guide- lines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes, but is not limited to:

DProtective eye wear.

DClothing and respirator as recommended by the fluid and solvent manufacturer. D Gloves.

D Hearing protection.

4 309662

Image 4
Contents Repair TexSpray 1030t FC Model 234113, Series aSpecifications 309662Fire and Explosion Hazard Equipment Misuse Hazard Component Description Flow and Air ControlPrime Valve TexSpray GunMaintenance Months Clean Air Flow Sensor as followsCompressor Requirements Material Air Requirements Minimum CompressorTroubleshooting Problem Cause SolutionTroubleshooting Problem Cause Solution Removal Displacement Pump RepairRepair Installation Pull piston rod 201 out of pump 3 2 to 3 inches 50 to 75 mmClean and Inspect All Parts Pump RepairDisassemble Pump Repair KitGrease inside of throat Bearing Housing & Connecting Rod Do steps 2 -- 5 of Displacement Pump, Installa- tion,Installation RemovalDrive Housing Pinion Assembly/Rotor/Field/Shaft/Clutch Remove five screws 99 and lockwashers 43 and pinion assemblyCollar Clutch Housing Sprayer Wiring Diagram EngineParts Sprayer Ref No. Part No Parts Flow Control KitParts Dump Manifold Detail aDetail B Detail C TI10246e 309662Parts Displacement Pump Model 235166, Series aPinion Housing Repair Kit Ref No Drive Housing Repair Kit Ref NoAccessories Air And Material Hose Kit 235737Technical Data DimensionsGraco Warranty and Disclaimers For Graco Canada Customers