Closed

Shutdown and Cleaning

9.Turn lever to close power flush attachment.

10.Unscrew inlet screen from suction tube. Place inlet screen in waste pail.

CLOSED

TIA

Step 15 is for returning paint in hose back to paint pail. One 50-ft (15-m) hose holds approximately 1-quart (1-liter) of paint.

15.

a. Pull and hold gun trigger. Point gun into

paint pail.

b. Turn power switch ON to begin pumping

paint in hose back into paint pail.

c. When water comes out of gun, continue

to trigger gun, aiming gun into waste

pail.

16. Continue triggering gun into waste pail for

1-2 minutes, until relatively clear water

comes out of gun.

11.Connect garden hose to suction tube with Power Flush attach- ment. Leave prime tube in waste pail.

TIA

12. Turn Spray-Prime/Drain valve to SPRAY.

302!9

13. Align arrow on sprayer with pail symbol on Pressure Control knob until pump starts.

TIA

14.Open lever on Power Flush attachment.

TIA

17. Turn Spray-Prime/Drain valve

to PRIME.

02)-%

18.Circulate water through

sprayer, into waste pail, for 20 seconds.

19. Turn power switch OFF.

WLD

20.Close Power Flush attachment. Turn off garden hose.

21.Unscrew Power Flush attach- ment from suction tube.

TIA

309225W