Operation
Operation
Pressure Relief Procedure
Follow Pressure Relief Procedure when you stop spraying and before cleaning, checking, servicing, or transporting equipment. Read Injection Warning, page 3.
1. Turn power switch (B) OFF and unplug power cord.
WLD
2.Turn
relieve pressure. |
3.Hold a metal part of the
gun firmly to a grounded metal pail. Trigger the gun to relieve pressure.
4. Engage trigger lock. See Trigger Lock, page 8.
TIA
Leave
If you suspect the spray tip or hose is clogged or that pressure has not been fully relieved after following the steps above, VERY SLOWLY loosen tip guard retaining nut or hose end coupling to relieve pressure gradually, then loosen completely. Clear hose or tip obstruction. Read Unclogging Spray Tip, page 12.
Trigger Lock
Always engage the trigger lock when you stop spraying to prevent the gun from being trig- gered accidentally by hand or if dropped or bumped.
4RIGGER ,OCKED 0OSITION
3'%& | 3' AND 3' |
|
TIA
Pressure Control Knob Settings
High Pressure | Low Pressure | Prime/ Rolling | TIA |
| |||
Spray | Spray | Clean |
|
To select function, align arrow on sprayer within range of function symbol on pressure con- trol knob.
8 | 309225W |