Graco Inc 309225W specifications Equipment Misuse Hazard

Page 4

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. Read Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. Read Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from dis- tributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your Graco distributor for informa- tion.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or overbend hoses or use hoses to pull equipment.

•Comply with all applicable safety regulations.

•Keep children and animals away from work area.

•Do not operate the unity when fatigued or under the influence of drugs or alcohol.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDS’s to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to appli- cable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

• Protective eye wear

•Clothing and respirator as recommended by the fluid and solvent manufacturer

•Gloves

•Hearing protection

4

309225W

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Airless Sprayers Specifications ModelsFire and Explosion Hazard Equipment Misuse Hazard Grounding and Electric Requirements InstallationThermal Overload Component Identification Sprayers Operation Pressure Relief ProcedureTrigger Lock Setup SetupPriming Oil- or Water-based MaterialsPump Check Valves DX ModelInstalling Tip and Base Unclogging Spray TipTip Selection Selecting Tip Hole SizeReversible Tip Selection Chart Choosing the Correct Tip for the JobAdjusting Pressure Spraying TechniquesPreventing Excessive Tip Wear Getting Started With Basic TechniquesTriggering Gun Shutdown and CleaningPail Flushing Power Flush Closed Cleaning InstaClean Fluid Filter XR models Gun Fluid FilterShort Term Storage up to Long Term Storage moreStowing Sprayer Troubleshooting Read Pump does not prime section Clean or replace InstaClean fluid Grounding and Electrical Maintenance and Service TipsCaring for Sprayer Pump PackingsTechnical Data Height with folded Handle 26 in cmGraco Standard Warranty For Graco Canada Customers
Top Page Image Contents