Graco Inc 3A0149C important safety instructions Equipment Misuse Hazard

Page 5

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

Do not leave the work area while equipment is energized or under pressure. Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manu- facturer’s replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhala- tion of toxic fumes, and burns. This equipment includes but is not limited to:

Protective eyewear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer

3A0149C

5

Image 5
Contents Model G40 Model G40 w/RAC tip Model G15 Models ContentsRelated Manuals Fire and Explosion Hazard Equipment Misuse Hazard Grounding InstallationTypical Installation Ventilate the Spray Booth Fluid Line Air LineSetup Reverse-A-CleanRAC Tip Assembly Operation Pressure Relief ProcedureTrigger Lock EngageddisengagedClose Open Spray Pattern AdjustmentHow the Air-Assisted Spray Gun Operates Correct Hvlp Operation Fluid ApplicationIncorrect Daily Gun Care, Flushing, and Cleaning Flushing and Cleaning General System MaintenanceFluid Filter Maintenance TI6729A Engaged Reverse-A-CleanRAC TipDisengaged Disengaged TI6580AProblem Cause Solution TroubleshootingTroubleshooting Repair Fan Valve ReplacementRepair Kits Complete Gun Packing Repair13‡ 14‡ 5g* 5cNeedle Repair Air Valve Repair Fluid Tube ReplacementRepair 3A0149C Reassembly 5b carbide only Parts Washer Ptfe Part No. Description QtyAIR CAP DescriptionParts 3A0149C Part No C857, G40 Gun with RAC Tip TIP GUARD/AIR CAP Assy Ref. No. Part No. Description QtySpray Tips, for use with G15/G40 Air Cap Spray Tip Selection ChartAAM Fine Finish Spray Tips GG4 Industrial Spray TipsLTX RAC Spray Tips RAC SwitchTips, for use with G40 RAC Air CapAAF Fine Finish Pre-Orifice Spray Tips WRX WideRAC Spray Tips FFT Fine Finish RAC Spray TipsAccessories Fan Valve Fine Adjustment Kit Ultimate Gun Cleaning Kit 15C161Plastic Seat Repair Kit SST Seat Repair KitPart Interchangeability Guide Model G40 Dimensions10.6 Gun Inlet Pressure PSI Technical DataCategory Data Graco Information Graco Standard Warranty