Setup
Reverse-A-Clean® (RAC) Tip Assembly
Model 24C857 guns use a
To assemble the RAC tip, insert the seat housing into the air cap assembly.
Screw the RAC tip assembly onto the gun and tighten firmly by hand.
TI7196A | TI7199A |
|
FIG. 7
Insert the SwitchTip.
FIG. 10
NOTICE
The RAC assembly for current model guns uses a different seat housing and has a coarser thread than the RAC assembly for earlier model guns. They are not interchangeable. Use of the incor- rect RAC assembly will damage the threads. See Part Interchangeability Guide, page 37.
TI7197A
FIG. 8
Insert the gasket seat.
TI7198A
FIG. 9
3A0149C | 9 |