Inventory
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
A
If any
Shipping Inventory (Figure 2) | Qty | |
A. | Spray Booth | 1 |
B. | Curtain (Right) | 1 |
C. | Connector Bars | 2 |
D. | Air Filter Indicator (Manometer) | 1 |
E. | Support Bar | 1 |
F. | Work Table | 1 |
K
J
I
H
G
L
B
M
C D
F
G. | First Stage Filters | 6 |
H. | Second Stage Filters | 6 |
I. | Third Stage Filters | 6 |
J. | Outlet | 1 |
K. | Exhaust Fan | 1 |
L. | Curtain (Left) | 1 |
M. Curtain (Upper) | 1 | |
N. | Curtain Brace (Left) | 1 |
O. | Curtain Brace (Right) | 1 |
Hardware and Tools (Not Shown) |
| |
• Hex Bolts | ||
• Flat Washers 5⁄16" (Exhaust Fan, Outlet) | 28 | |
• Inlet Gasket (Exhaust Fan) | 1 | |
• | Outlet Gasket (Outlet) | 1 |
• Hex Nuts | 10 | |
• Flat Hd Screws |
| |
| (Support Bar, Curtains, Work Table) | 16 |
• | Hex Nuts |
|
| (Support Bar, Curtains, Work Table) | 16 |
• | Flat Washers 1⁄4" |
|
| (Support Bar, Curtains, Work Table) | 16 |
• Hex Bolts | 8 | |
• | Tubing (Manometer) | 2 |
• Tubing Connector Fitting (Manometer) | 1 | |
• | Plastic Clip (Manometer) | 1 |
• Tap Screw M4 x 12 (Manometer) | 1 | |
• Tap Screws M4 x 45 (Manometer) | 2 | |
• Red Gauge Oil (Manometer) | 1 | |
• Arrow Labels (Red and Green) | 2 |
| E |
|
|
|
|
|
|
| N |
| O |
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
Figure 2. G0533 Inventory. |
|
|
|
|
NOTICE
If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are
Model G0533 (Mfg. Since 3/11) |