Site Considerations
Floor Load
Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some floors may require additional reinforcement to support both the machine and operator.
Working Clearances
Consider existing and future needs, size of mate- rial to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. Make a note of the exhaust fan location. (See Safety on Page 8.) See Figure 3 for the minimum working clearances.
52"
63"
Figure 3. Minimum working clearances (top
view).
Unsupervised children and visitors inside your shop could cause serious per- sonal injury to themselves. Lock all entrances to the shop when you are away and DO NOT allow unsupervised children or visitors in your shop at any time!
Model G0533 (Mfg. Since 3/11)
Exhaust Fan
To install the exhaust fan housing:
1.Place the inlet gasket over the exhaust fan inlet.
The exhaust fan is very heavy. You MUST have assistance when mov- ing, lifting or mounting the exhaust fan onto the spray booth.
2.With the help of two strong assistants, or using a hoist, place the exhaust fan housing over the inlet gasket.
3.Rotate the exhaust fan housing so the outlet port is aimed toward the back of the spray booth.
4.Align the gasket and exhaust fan mount- ing holes, and fasten with eight
Figure 4.