Grizzly G0533 owner manual Dirty filter mark example

6.With new filters installed, turn the spray booth ON, observe the rise in the reading, and mark with the supplied green arrow as shown in the example in Figure 19.

New Filter

Indicator

Mark

Figure 19. New filter installation mark example.

Model G0533 (Mfg. Since 3/11)

7.Multiply the reading from Step 6 times 2 (2x) and mark with the supplied red arrow (Figure 20). This is the dirty filter indicator mark. When the fluid reaches the red arrow, install new filters.

Dirty Filter

Indicator

Mark

Figure 20. Dirty filter mark example.

Note: Always make sure the fluid level is at zero before using the spray booth each time. Also, check the fluid level on a regular basis and re-fill as needed.

-19-