I.C.T.C. Holdings Corporation B series owner manual Table of Contents

Page 3

TABLE OF CONTENTS

 

For greatest user satisfaction, please familiarize

 

yourself with all maintenance and operational instructions

 

Important Safety Precautions

3-4

Introduction

5

Operating Instructions

5

Setting Up To Spray

6

Flushing The Unit

7

Special Notes

8

Airless Spray Painting Suggestions

9-11

Trouble Shooting

12-19

Hydrapulse Membrane Replacement

20

Intake Seat Replacement

21

Outgo Valve

22

Piston Repairs

23-24

Pressure Control Valve Repairs

25

Accessories

26

Parts List And Descriptions

27-31

Exploded Unit Diagram

32-33

Parts Depot List

34-37

IMPORTANT

NOTE: AS WITH ALL MECHANICAL EQUIPMENT, PROPER OPERATING AND MAINTENANCE PROCEDURES ARE REQUIRED TO KEEP YOUR H.E.R.O. AIRLESS PUMP PERFORMING TO YOUR SATISFACTION. THE FOLLOWING SAFETY, OPERATING AND MAINTENANCE INSTRUCTIONS ARE IMPORTANT.

Read and understand this manual completely, especially with regard to all safety precautions. Read and follow instructions on all warning labels on your equipment. Keep the warning labels clean and readable at all times. Order new labels from your local distributor or from H.E.R.O. Industries Ltd. if needed.

The manufacturer shall not be responsible for any loss, damages, or injury of any kind or nature whatsoever resulting from the use the equipment other than in strict compliance with the instructions, cautions and warnings contained in this operating and instruction manual and as displayed on the face of the equipment.

This system is capable of producing 2400 psi. ( spray pressure ). To avoid rupture and injury DO NOT operate this pump with components rated less than 3000 psi. working pressure (including but not limited to spray guns, hose and connections).

Before servicing, cleaning or removing of any part, shut off power and relieve pressure.

H.E.R.O. INDUSTRIES LTD.

2

1100MD OWNERS MANUAL - “B” VERSION

Page 2 Page 4
Image 3
Page 2 Page 4
Contents NEW For Hydrapulse B Version Starting with serial R.O. Warranty Table of Contents Important Safety Precautions Always AlwaysSeries Hydrapulse Intake Assembly R.O. Airless Spray PaintingOperating Instructions Setting UP to Spray Special Storage Instructions Flushing the Unit AT Shutdown Or Color ChangeSpecial Notes General Maintenance Instructions For Excellent RESULTS, Read and Practice These Techniques Airless Spray Painting Suggestions and TechniquePoor Good Tailing Good Pattern Fog, Overspray TIP Size For Application Spray TIP SelectionTroubleshooting Hydraulic Intake Valve REF# 59 Pressure Test Hydrapulse Membrane Test Situation Sprayer does not Prime with Paint Puddle of OIL Appearing Under Sprayer During Operation Spray Pattern is Spotty or Uneven REF# 46 KIT Hydrapulse Membrane ReplacementReplacement of Intake Seat REF # Tools Required -1 wrench Outgo Valve REF#REF# Piston RepairsPage Pressure Control Valve Parts List Accessories Parts ListIntake Parts Outgo Parts 45A TANK, Complete. Includes Ref# Drive Parts 116 PW-4080 Foot PAD, Includes Ref# 1100MD Schematic Partsschematics Authorized Sales and Service Centers U.S.A Southern California Authorized Sales and Service CENTERS- U.S.ANEW York Rhode Island R.O. Industries 2719 Lake City WAY BURNABY, B.C Canada
Top Page Image Contents