4.Remove plastic cap and thread the pressure hose onto the hose spray port and secure.
Power Switch
Hose connected to spray port
5.Remove the plastic cap on the end of the spray gun and thread the other end of the hose onto it. Remove the plastic cap from gun tip.
Gun connected to hose
6.Thread the suction tube onto the inlet valve.
7.Press the return tube onto the return tube fitting.
Return tube | Suction tube |
on return tube | connection |
fitting | to inlet valve. |
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 99702 | For technical questions, please call | Page 10 |