23.Adjust the pressure control dial until a solid coat of paint of desired thick- ness is achieved.
24.Painting Tips:
•Spray 10 to 12 inches from the surface.
•Begin moving the Gun before squeezing the Trigger.
•Release the Trigger before ending the stroke.
•Paint using short, even strokes.
•Keep the spray gun at a right angle to the painting surface.
•Keep the tip of the spray gun paral- lel to the ground.
•Overlap each stroke by about 30% to ensure an even coat.
25.When finished, turn the Power Switch to its “OFF” position. Point the Gun into the waste container and squeeze the Trigger to discharge Gun and
Hose pressure. Lock the Gun.
26.Disconnect the power supply after use. Clean, then store the tool in- doors out of children’s reach.
SKU 99702 | For technical questions, please call | Page 13 |