be flushed with water after being flushed with mineral spirits.
o. Turn the power switch Off and un- plug the Sprayer.
p. Remove the Gun from the hose.
q. Remove the filter from the spray gun. Clean with a soft brush and ap- propriate cleaning solution.
r.Remove the spray tip from the gun and clean with a soft brush and the appropriate cleaning solution.
s.Clean the washer, and spray tip seat.
t.Reassemble the Gun.
3.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
SKU 99702 | For technical questions, please call | Page 15 |