Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Sprayer will not | 1. | No power at outlet. | 1. | Check power at outlet. |
start | 2. | Cord not connected. | 2. | Check that cord is plugged in. |
| 3. | Sprayer turned off under | 3. | Turn pressure control knob to maximum, or |
|
| pressure. |
| PRIME/SPRAY knob to PRIME. |
Sprayer will not | 1. | Sprayer has lost prime. | 1. | Prime sprayer again. |
draw paint | 2. | Paint level too low in container. | 2. | Fill paint container. |
| 3. | Suction set clogged. | 3. | Clean suction Set. |
| 4. | Suction tube loose at inlet. | 4. | Tighten Suction tube connections. |
Pressure drops | 1. | Spray tip worn. | 1. | Replace spray tip. |
when trigger pulled | 2. | Suction set screen clogged. | 2. | Clean suction set screen. |
| 3. | Gun filter plugged. | 3. | Clean gun filter. |
| 4. | Paint too heavy of coarse. | 4. | Strain and/or thin paint. |
Paint runs | 1. | Paint too diluted. | 1. | Add undiluted paint to thicken. |
excessively | 2. | Spray adjustment wrong. | 2. | Decrease pressure. |
| 3. | Gun movement too slow. | 3. | Increase speed of stroke. |
| 4. | Too close to surface. | 4. | Move gun back from surface. |
Paint coverage | 1. | Paint not diluted enough. | 1. | Dilute paint more. |
poor | 2. | Paint is grainy. | 2. | Filter paint. |
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/ or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 99702 | For technical questions, please call | Page 16 |