Grizzly G0755 owner manual Axis Handwheels, Axis Power Feed, ON/OFF Switch

X- & Y-Axis Handwheels

Use Figure 21 and the following descriptions to become familiar with the X- and Y-axis manual table movement.

BD

	C
A

Figure 21. Table locks and limit stops.

A.Y-Axis Handwheel: Moves table back and forth.

B.X-Axis Table Locks: Increase rigidity of table when X-axis movement is not required for operation.

C.Y-Axis Table Lock: Increase rigidity of table when Y -axis movement is not required for operation.

D.X-Axis Handwheel: Moves table side to side.

Model G0755 (Mfg. Since 1/13)

X-Axis Power Feed

Use Figures 22–23and the following descriptions to become familiar with the power feed controls.

A B C

F E D

Figure 22. X-axis power feed controls.

G

H

Figure 23. Limit switch and limit stops.

A.ON/OFF Light: Lights when unit is turned ON.

B.Direction Lever: Controls direction of pow- ered table travel.

C.Rapid Switch: When held down, moves table rapidly in chosen direction.

D.Power Light: Lights when unit is connected to power.

E.Speed Dial: Controls rate of power feed.

F.ON/OFF Switch

G.X-Axis Limit Stops: Adjustable along front of table to restrict X-axis table movement, particularly when using the power feed.

H.Limit Switch: Stops power feed when con- tacted by a limit stop.

-23-