SECTION 3: SET UP
This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!
Items Needed for
Set Up
The following items are needed to complete the set up process, but are not included with your machine:
Description | Qty | |
• | Degreaser | Varies |
• |
| Varies |
• | Wrench/Socket 17mm | 1 |
• | Wrench/Socket 19mm | 1 |
• | Flat Head Screwdriver | 1 |
• Another Person for Lifting Help | 1 | |
Unpacking
The Model G0517 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at
Inventory
After all the parts have been removed from the two boxes, you should have the following items:
Description |
| Qty | |
A. | Stand | 1 | |
B. | Base Assembly | 1 | |
C. | Headstock | 1 | |
D. | Splash Tray | 1 | |
E. | 2 | ||
F. | Milling Vise w/Handle | 1 | |
G. | Downfeed Handle Shafts w/Ball Knobs | ..... 3 | |
H. | Handwheel Handles | 3 | |
I. | Drill Chuck Arbor | 1 | |
J. | Drawbar | 1 | |
K. | MT #2/#3 & MT#1/#2 Sleeves | 1 Each | |
L. | Wrenches and Drift Key | 1 Each | |
M. | Mounting Bolts, Washers, Nuts | 4 Each | |
N. | Drill Chuck & Key | 1 Each | |
| A |
|
|
B
C
D
Figure 2. Main parts inventory.
(570) 546-9663 for advice.
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory the contents.
E
L
F
G
I 
J
M
H
K
N