SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Micro Mill/Drill Machine in areas near flammable chemicals, dusts, and vapors. Do not use the Micro Mill/Drill Machine in a damp or wet location.
2.GROUND THIS PRODUCT. The electrical Power Cord/Plug (part #128) for this product is equipped with a grounded,
3.IF AN EXTENSION CORD (not provided) IS USED, MAKE SURE TO USE ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. (See Figure A.)
AWG RATING CHART - 120 VOLT
FIGURE A
4.KEEP ALL SAFETY GUARDS IN PLACE, IN PROPER ADJUSTMENT, AND IN PROPER ALIGNMENT.
5.REDUCE THE RISK OF ACCIDENTAL STARTING. Make sure the Forward/Re- verse Switch (part #125) is in the “OFF” position before plugging the Power Cord/ Plug (part #128) into a grounded,
(See Figure B, and Assy. Diagram.)
6.PRIOR TO STARTING THE MICRO MILL/DRILL MACHINE, MAKE SURE ALL ADJUSTING KEYS AND WRENCHES ARE REMOVED FROM THE TOOL.
7.DO NOT USE ROTARY PLANERS, WIRE WHEELS, OR ROUTER BITS ON THIS MICRO MILL/DRILL MACHINE.
SKU 47158 | For technical questions, please call | Page |