Harbor Freight Tools 44506 Operating Instructions, Tool Set Up, Work Piece and Work Area Set Up

Page 10

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY: Do not operate with ANY guard disabled, damaged, or removed.

Setting the Depth Scale to Drill to a Specified Depth

1.Make sure the Drill Press is OFF and Power Cord (33) is unplugged. Secure the workpiece to the Table.

Spring

 

Pointer

Cap

 

(29)

 

(32)

Hex

 

Hex

 

Nuts

Nuts

 

(31)

(30)

 

 

Notch

 

 

2.Mark the desired hole depth on the side of the workpiece. Also view the depth indicator Pointer (32).

3.Loosen the Hex Nuts (31) and screw both toward the top of Stop Rod (B12).

4.Turn the Feed Wheel counterclockwise to bring the tip of the drill bit down, next to the hole depth mark.

5.Turn the Hex Nuts (31) down until they touch the Feed Wheel stop.

Tilting the Table

1.Loosen Screw (C6) under the Table assembly with a wrench.

2.Rotate the Table to the desired angle. The scale can be used to approximate the angle.

3.Retighten the Screw.

Work Piece and Work Area Set Up

1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.

2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area

Page 10

For technical questions, please call 1-800-444-3353.

SKU 44506

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions or replacement parts, please call Drill PressContents Save This Manual General Tool Safety WarningsSave all warnings and instructions for future reference 25’ 50’ 100’ 150’ Table a110-120 V~ Grounded Tools Tools With Three Prong Plugs Drill Press Safety WarningsGrounding Instructions 125 V~ 3-Prong Plug and OutletDo not operate with ANY guard disabled, damaged, or removed Vibration SafetyFor technical questions, please call Unpacking SpecificationsAssembly/Mounting Instructions for putting Into useDeflection Distance Operating Instructions Tool Set UpWork Piece and Work Area Set Up Tilting the TableGeneral Operating Instructions SKU For technical questions, please callInstalling the Chuck and Spindle Shaft Maintenance ServicingCleaning, Maintenance, Lubrication Removing the Chuck and Spindle ShaftAdjusting the Feed Wheel Return Tension Spring Troubleshooting Problem Possible Causes Likely SolutionsPart Description Parts Lists and DiagramsHead Assembly Parts List Record Product’s Serial Number HereHead Assembly Diagram Parts List and Diagram a Pulley and Spindle Parts List and Diagram B Chuck and Spindle Shaft Parts List and Diagram C Base and Table Limited 90 DAY Warranty
Related manuals
Manual 16 pages 21.75 Kb

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.
Top Page Image Contents