Harbor Freight Tools 44506 operating instructions Deflection Distance

Page 9

(C3).

Slide it down on the Column Tube as far as it will go. Align it so that it faces straight forward, inline with the Base.

6.Thread in two Set Screws (11), into the side of the Head (1) and tighten.

7.Attach Knob (A2) to the (top) pulley Guard (A5) using Pan Head Screw (A3).

8.Adjust Belt (A4) tension:

a.Open the pulley Guard (A5) to expose the Belt.

b.Turn the Motor Adjusting Knob (10) counterclockwise to loosen Belt Tension.

c.Push the Motor backward, tightening the Belt on the pulleys, and hold in place.

d.Turn the Motor Adjusting Knob clockwise to tighten the Belt in place.

e.Refer to the chart inside the Guard lid to select speed and belt locations.

Deflection

Distance

Note: To test the proper belt tension, push in on the center of each belt at its center. It should move only 1/2 inch (in or out).

Caution! Overtightening the belts can cause the motor to bind, and not start. It can also damage Motor bearings.

9.Thread the Feed Knobs (12) and Rods (13) onto the Pinion Shaft (14) and tighten them.

10.Install the Chuck (B8):

a.Thoroughly clean the tapered hole in the Chuck and the Spindle Shaft (B7) of all

dirt, grease, oil, and protective coatings (paint thinner may be necessary).

b. Slide the Chuck onto the Spindle Shaft.

c. Turn the Chuck sleeve clockwise and open the jaws completely.

d. Tap the nose of the Chuck lightly with

a piece of wood to securely set the Chuck.

Screw (C6)

11.Verify that the Table (C7) is square (90 degrees) to the Head Assembly and drill bit.

a.Secure a three inch drill bit in the Chuck (hand tighten, no chuck key is required).

b.Raise the Table to within four inches of the Chuck.

c.Place the long side of a combination square on the Table.

d.Align the short side of the square to the drill bit.

e.If the Table is not square to the bit, loosen Screw (C6) with a wrench.

f.Rotate the Table until it is square to the bit.

g.Retighten the Screw (C6).

SKU 44506

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Drill Press For technical questions or replacement parts, please callContents General Tool Safety Warnings Save This ManualSave all warnings and instructions for future reference Table a 25’ 50’ 100’ 150’Grounding Instructions Drill Press Safety Warnings110-120 V~ Grounded Tools Tools With Three Prong Plugs 125 V~ 3-Prong Plug and OutletVibration Safety Do not operate with ANY guard disabled, damaged, or removedFor technical questions, please call Assembly/Mounting SpecificationsUnpacking Instructions for putting Into useDeflection Distance Work Piece and Work Area Set Up Tool Set UpOperating Instructions Tilting the TableSKU For technical questions, please call General Operating InstructionsCleaning, Maintenance, Lubrication Maintenance ServicingInstalling the Chuck and Spindle Shaft Removing the Chuck and Spindle ShaftAdjusting the Feed Wheel Return Tension Spring Problem Possible Causes Likely Solutions TroubleshootingHead Assembly Parts List Parts Lists and DiagramsPart Description Record Product’s Serial Number HereHead Assembly Diagram Parts List and Diagram a Pulley and Spindle Parts List and Diagram B Chuck and Spindle Shaft Parts List and Diagram C Base and Table Limited 90 DAY Warranty
Related manuals
Manual 16 pages 21.75 Kb

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.
Top Page Image Contents