Harbor Freight Tools 44506 operating instructions Adjusting the Feed Wheel Return Tension Spring

Page 13

Adjusting the Feed Wheel Return Tension Spring

CAUTION! Wear an ANSI-approved full face shield during this procedure.

1.Move the Chuck to its uppermost position.

2.Loosen Hex Nuts (31) and move both to the lowermost position.

This will keep the Chuck from falling during this adjustment.

3.Insert a screwdriver in the lower-front notch of the Spring Cap (29).

Hold it in place and, using a wrench, remove the (outer) Hex Nut (30) only.

4.With the screwdriver still in place, loosen the (inner) Hex Nut (30) until the Spring Cap notch disengages from the Spring Retainer (27) -- about 1/8 inch.

8.Pull the Feed Knob and check the spring tension, making sure the up movement is smooth and complete.

From one inch down, the Chuck should return to its uppermost position. If more tension is required, repeat steps.

9.Replace the (outer) Hex Nut and tighten on top of the (inner) Hex Nut.

Do not overtighten.

10.If the (up/down) movement is restricted, slightly loosen the (inner) Hex Nut, and retighten the (outer) Hex Nut.

Spring

 

Pointer

Cap

 

(29)

 

(32)

Hex

 

Hex

 

Nuts

Nuts

 

(31)

(30)

 

 

Notch

 

 

5.Turn the screwdriver counterclockwise and engage the next Spring Cap notch. Leave the screwdriver in place.

6.Tighten the (inner) Hex Nut just enough to engage the notch.

If this Hex Nut is too tight, it will restrict (up and down) Chuck-Spindle movement.

7.Loosen and screw the Hex Nuts (31) to the top of the Stop Rod (B12).

SKU 44506

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Drill Press For technical questions or replacement parts, please callContents Save This Manual General Tool Safety WarningsSave all warnings and instructions for future reference Table a 25’ 50’ 100’ 150’Grounding Instructions Drill Press Safety Warnings110-120 V~ Grounded Tools Tools With Three Prong Plugs 125 V~ 3-Prong Plug and OutletVibration Safety Do not operate with ANY guard disabled, damaged, or removedFor technical questions, please call Assembly/Mounting SpecificationsUnpacking Instructions for putting Into useDeflection Distance Work Piece and Work Area Set Up Tool Set UpOperating Instructions Tilting the TableSKU For technical questions, please call General Operating InstructionsCleaning, Maintenance, Lubrication Maintenance ServicingInstalling the Chuck and Spindle Shaft Removing the Chuck and Spindle ShaftAdjusting the Feed Wheel Return Tension Spring Problem Possible Causes Likely Solutions TroubleshootingHead Assembly Parts List Parts Lists and DiagramsPart Description Record Product’s Serial Number HereHead Assembly Diagram Parts List and Diagram a Pulley and Spindle Parts List and Diagram B Chuck and Spindle Shaft Parts List and Diagram C Base and Table Limited 90 DAY Warranty
Related manuals
Manual 16 pages 21.75 Kb

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.
Top Page Image Contents