25’ 50’ 100’ 150’, Table a | Harbor Freight Tools 44506 guide

8.USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS

(120 VOLT)

NAMEPLATE	EXTENSION CORD
AMPERES		LENGTH
(at full load)	25’	50’	100’	150’
0 – 6	18	16	16	14
6.1 – 10	18	16	14	12
10.1 – 12	16	16	14	12
12.1 – 16	14	12	Do not use.

TABLE A

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and it frees both hands to operate tool.

13.DON’T OVERREACH. Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

15.DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before plugging in.

17.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury to persons.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

Page 4

For technical questions, please call 1-800-444-3353.

SKU 44506

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.