Harbor Freight Tools 44506 operating instructions General Operating Instructions

Page 11

with enough extra length to allow free movement while working.

3.Clamp workpiece or brace against column to prevent rotation.

4.There must not be objects, such as utility lines, nearby that will present a hazard while working.

General Operating Instructions

1.Secure the tool to a supporting structure before use.

2.Make sure the Drill Press is OFF and the Power Cord (33) is unplugged. Loosen the Lock Handle Support (C2) and adjust the Table height to accommodate the workpiece being drilled. Retighten Lock Support Handle.

3.Open the Chuck (B8) and insert the drill bit in the center.

Tighten securely with the Chuck Key.

4.Secure the workpiece (and backup material) to the Table using a vise and/or clamp.

The workpiece sits on the backup material which in typically a scrap piece of wood used to stabilize the workpiece. It also helps the drill make a cleaner hole. To keep it from spinning, have it touching the left side of the Column.

5.Bring the drill bit down with the Feed Knob (12) to where the hole is to be drilled.

Make minor workpiece alignment adjustments.

6.Plug the Power Cord (33) into an electrical outlet.

7.Insert the Switch Key (24) into the Locking Switch (21).

Warning: Wear an ANSI-approved full face shield while drilling.

8.Push the Switch up to turn the Motor ON.

9.Pull down on the Feed Knob and slowly drill the hole into the workpiece.

Warning: If the drill bit grabs and spins the workpiece, do not attempt to stop the spinning with your hands. Step back, and push the Switch down to the OFF position. Wait for the spindle to stop turning before dislodging the workpiece.

10.When the drilling is complete, press the Switch to the OFF position and remove the Switch Key (Keep the Switch Key in a safe place).

11.To prevent accidents, turn off the tool and disconnect its power supply after use.

SKU 44506

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Drill Press For technical questions or replacement parts, please callContents Save all warnings and instructions for future reference General Tool Safety WarningsSave This Manual Table a 25’ 50’ 100’ 150’125 V~ 3-Prong Plug and Outlet Drill Press Safety WarningsGrounding Instructions 110-120 V~ Grounded Tools Tools With Three Prong PlugsVibration Safety Do not operate with ANY guard disabled, damaged, or removedFor technical questions, please call Instructions for putting Into use SpecificationsAssembly/Mounting UnpackingDeflection Distance Tilting the Table Tool Set UpWork Piece and Work Area Set Up Operating InstructionsSKU For technical questions, please call General Operating InstructionsRemoving the Chuck and Spindle Shaft Maintenance ServicingCleaning, Maintenance, Lubrication Installing the Chuck and Spindle ShaftAdjusting the Feed Wheel Return Tension Spring Problem Possible Causes Likely Solutions TroubleshootingRecord Product’s Serial Number Here Parts Lists and DiagramsHead Assembly Parts List Part DescriptionHead Assembly Diagram Parts List and Diagram a Pulley and Spindle Parts List and Diagram B Chuck and Spindle Shaft Parts List and Diagram C Base and Table Limited 90 DAY Warranty
Related manuals
Manual 16 pages 21.75 Kb

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.
Top Page Image Contents