Harbor Freight Tools 44506 Maintenance Servicing, Cleaning, Maintenance, Lubrication

Page 12

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and

Lubrication

1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.

2.After Use, wipe external surfaces of the tool with clean cloth.

3.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

Removing the Chuck and Spindle Shaft

During this procedure, refer to the Chuck and Spindle Assembly Drawing.

1.Pull the Feed Wheel counterclockwise and hold the Chuck at a depth of three inches.

2.Align the key holes in the Spindle Shaft (B7) and the Quill Tube (B3) by turning the Chuck by hand.

3.Insert a Wedge Drift Key (not supplied) into the key holes.

4.Place a bundled cloth or basket below the Chuck to catch it when it falls. Lightly tap the Wedge Drift Key with a rubber mallet until the Spindle Shaft falls out of the Quill Tube.

Installing the Chuck and Spindle Shaft

1.Using a clean cloth, wipe the tapered surfaces on the Spindle Shaft (B7).

2.Slide the Spindle Shaft and Chuck assembly up and into the Quill Tube (B3).

At the same time, turn the assembly until the rectangular end of the Spindle Shaft slips into the notch on the Quill Tube.

WARNING! In the previous step, if the Spindle Shaft is not properly set in the Quill Tube notch, it may fly out during operation.

3.Loosen the Lock Handle Support (C2) and raise the Table (C7) about three inches below the Chuck.

4.Turn the Chuck sleeve clockwise to open the jaws completely.

5.Pull the Feed Knob counterclockwise and force the Chuck against the Table until the Spindle Shaft is secure.

Page 12

For technical questions, please call 1-800-444-3353.

SKU 44506

Page 11 Page 13
Image 12
Page 11 Page 13
Contents For technical questions or replacement parts, please call Drill PressContents General Tool Safety Warnings Save This ManualSave all warnings and instructions for future reference 25’ 50’ 100’ 150’ Table aDrill Press Safety Warnings Grounding Instructions110-120 V~ Grounded Tools Tools With Three Prong Plugs 125 V~ 3-Prong Plug and OutletDo not operate with ANY guard disabled, damaged, or removed Vibration SafetyFor technical questions, please call Specifications Assembly/MountingUnpacking Instructions for putting Into useDeflection Distance Tool Set Up Work Piece and Work Area Set UpOperating Instructions Tilting the TableGeneral Operating Instructions SKU For technical questions, please callMaintenance Servicing Cleaning, Maintenance, LubricationInstalling the Chuck and Spindle Shaft Removing the Chuck and Spindle ShaftAdjusting the Feed Wheel Return Tension Spring Troubleshooting Problem Possible Causes Likely SolutionsParts Lists and Diagrams Head Assembly Parts ListPart Description Record Product’s Serial Number HereHead Assembly Diagram Parts List and Diagram a Pulley and Spindle Parts List and Diagram B Chuck and Spindle Shaft Parts List and Diagram C Base and Table Limited 90 DAY Warranty
Related manuals
Manual 16 pages 21.75 Kb

44506 specifications

The Harbor Freight Tools 44506 8-inch drill press is a compact yet powerful tool designed for hobbyists and DIY enthusiasts who require precision drilling in a variety of materials. This model stands out due to its user-friendly design and impressive set of features that enhance both performance and versatility.

One of the key characteristics of the 44506 drill press is its robust 1/2 HP motor that provides ample power for a wide range of applications. With variable speed settings ranging from 620 to 3100 RPM, users can easily adjust the speed to suit different drilling tasks, from wood and plastic to metal. This flexibility allows for precise control, ensuring clean and accurate holes.

The 8-inch swing capacity allows for drilling into thicker materials while maintaining stability and precision. The drill press features a spacious work table that can be tilted and adjusted, providing additional support and increasing the range of motion. This facilitates angled drilling and easier manipulation of larger workpieces.

Another significant aspect of the Harbor Freight 44506 is its depth adjustment system, which enhances the drill press's ability to consistently drill holes of the same depth. This feature is particularly useful for repetitive tasks where uniformity is crucial, such as doweling or creating pocket holes.

Safety features are also integral to this drill press, with a safety switch that prevents accidental startups, ensuring that users can work confidently. The sturdy base provides stability, reducing vibrations during operation, which further enhances precision and safety.

In terms of technology, the drill press incorporates a laser alignment system that assists users in achieving accurate hole placement. This is especially valuable for intricate projects where precision is paramount. The dual slide rails ensure smooth movement and consistent performance over time.

Overall, the Harbor Freight Tools 44506 8-inch drill press is a well-rounded tool that combines power, versatility, and safety. Its various features make it suitable for both beginners and seasoned woodworkers, enabling them to tackle a wide range of drilling tasks with confidence and precision. Whether you're eyeing a simple home project or more complex creations, this drill press is a reliable addition to any workshop.
Top Page Image Contents