Echo X750409-3607 manual Check UP of Nuts and Other Hardwares, Fuel Statement, Fuel Mix Chart 50

Page 10

WARNING

ALTERNATIVE FUELS, SUCH AS E-20 (20 % ETHANOL), E-85 (85 % ETHANOL) OR ANY FUELS NOT MEETING ABOVE REQUIREMENTS ARE NOT APPROVED FOR USE IN ECHO 2-STROKE GASOLINE ENGINES.

USE OF ALTERNATIVE FUELS MAY CAUSE PERFORMANCE PROBLEMS, LOSS OF POWER, OVERHEATING, FUEL VAPOR LOCK, AND UNINTENDED MACHINE OPERATION, INCLUDING, BUT NOT LIMITED TO, IMPROPER CLUTCH ENGAGEMENT. ALTERNATIVE FUELS MAY ALSO CAUSE PREMATURE DETERIORATION OF FUEL LINES, GASKETS, CARBURETOR AND OTHER ENGINE COMPONENTS.

Fuel Mix Chart 50 : 1

 

US.

METRIC

 

 

 

 

 

Gasoline

 

Oil

Gasoline

Oil

 

 

 

 

 

Gallons

 

US. fl. oz.

L

mL

 

 

 

 

 

1

 

2.6

4

80

2

 

5.2

8

160

5

 

12.8

20

400

CHECK UP OF NUTS AND OTHER HARDWARES

Check up loose nuts, bolts and screws before using the unit every day.

FUEL STATEMENT

GASOLINE - Use 89 Octane [(R+M)/2] (mid grade or higher) gasoline or gasohol known to be good quality.

Gasohol may contain up to 10 % Ethyl (grain) alcohol or 15 % MTBE (methyl tertiary-butyl ether). Gasohol containing methyl (wood) alcohol is NOT approved.

Two-Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD Standards must be used. ECHO brand premium Power Blend X™ Universal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC/FD certified oil, such as ECHO premium Power Blend X™, will void the two-stroke engine warranty.

IMPORTANT

ECHO premium Power Blend X™ Universal 2-Stroke Oil may be mixed at 50 : 1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals.

Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

8

Image 10
Contents OPERATOR’S Manual Engine Drill Contents Decals and Symbols Safety and Special InformationIntroduction Operator Safety SafetyProtective Equipment Protecting Others Physical ConditionRepetitive Stress Injuries Operating Techniques Chuck DescriptionSilencer cover Shift leverFront Handle AssemblingOperation Drill BITCheck UP of Nuts and Other Hardwares Fuel Mix Chart 50Fuel Statement Handling Fuel Mixing InstructionsStarting Warm Engine Starting Cold EngineStopping Engine Maintenance and Care Reverse RotationSkill Levels Emission DataEmission Control Trouble Shooting Trouble Engine hard to start Cause RemedyFuel Filter MaintenanceAIR Filter Check Fuel SystemAdjusting Carburetor Replacement of ChuckHigh Altitude Operation Cleaning Silencer and Exhaust Port Cleaning Cylinder FinsExhaust Port Cleaning Storage Long Term StorageSpecifications EDR-260Warranty Statements Exceptions99922201032 11/18/2011 01/2010