|
| REVERSE ROTATION | |
|
| • This model is equipped with reverse rotation | |
| Counter | mechanism. | |
| clockwise | • When drilling, set shift lever down to clockwise | |
| (CCW) | ||
|
| (CW) rotation position. | |
|
| • If bit is locked due to deep penetration during | |
|
| drilling operation, set shift lever up to | |
|
| counterclockwise (CCW) rotation position and | |
| Clockwise | operate reversed for easy | |
Shift lever |
| ||
(CW) | • When changing direction of drill rotation, | ||
| |||
|
| ||
|
| operate as follows: | |
|
| - Return engine to idle. | |
|
| - Engine shift lever to CW or CCW position | |
|
| with a slight acceleration of the throttle | |
|
| trigger. | |
|
| To properly lock the gears in the gear case. | |
|
| - Do not operate shift lever forcibly when | |
|
| changing rotation direction. |
WARNING
•WHEN THE DRILL CAN NOT PULL OUT FROM THE WOOD, DO NOT TRY TO PULL OUT THE DRILL BY FORCE.
•WHEN CHANGING THE BIT, ENSURE TO STOP THE ENGINE.
•AFTER A JOB, BIT AND GEAR CASING MAY BE HEATED, DO NOT TOUCH THEM WITH BARE HANDS.
NOTE
Do not shift from forward to reverse (or vice- versa) while the chuck is turning.
Failure to do so may cause unit damage. Always release throttle and allow the unit to return to idle before shifting.
Do not stand close to drill or chuck with your body or clothes while operation.
When drilling, ensure that no power cable or other obstacle exist.
MAINTENANCE AND CARE
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
11