Echo X750-005 05 7, X750409-3607 Introduction, Safety and Special Information, Decals and Symbols

Page 3

INTRODUCTION

ECHO Engine Drill EDR-260 is a lightweight, high performance, two-stroke engined unit designed for drilling.

This Manual provides the information necessary for operation and maintenance.

WARNING

IMPROPER USE OR CARE OF THIS UNIT, OR FAILURE TO WEAR PROPER PROTECTION CAN RESULT IN SERIOUS INJURY.

READ AND UNDERSTAND THE RULES FOR SAFE OPERATION AND ALL INSTRUCTIONS IN THIS MANUAL.

SAFETY AND SPECIAL INFORMATION

DANGER

The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.

WARNING

The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided.

CAUTION

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.

NOTE

This enclosed message provides tips for use, care and maintenance of the unit.

IMPORTANT

The enclosed message provides information necessary for the protection of the unit.

Throughout this manual and on the product itself, you will find safety alters and helpful, information messages preceded by symbols or key words.

The following is an explanation of those symbols and key words and what they mean to you.

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

WARNING

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an authorized servicing dealer before using.

DECALS AND SYMBOLS

Symbol form/shape Symbol description/application Symbol form/shape

Symbol description/application

Carefully read the operator’s

Wear eyes, ears and head

manual

protection

Beware of high-temperature areas

Finger severing

1

Image 3
Contents OPERATOR’S Manual Engine Drill Contents Safety and Special Information Decals and SymbolsIntroduction Safety Operator SafetyProtective Equipment Physical Condition Protecting OthersRepetitive Stress Injuries Operating Techniques Shift lever DescriptionSilencer cover ChuckDrill BIT AssemblingOperation Front HandleFuel Mix Chart 50 Check UP of Nuts and Other HardwaresFuel Statement Mixing Instructions Handling FuelStarting Cold Engine Starting Warm EngineStopping Engine Reverse Rotation Maintenance and CareEmission Data Skill LevelsEmission Control Trouble Engine hard to start Cause Remedy Trouble ShootingCheck Fuel System MaintenanceAIR Filter Fuel FilterReplacement of Chuck Adjusting CarburetorHigh Altitude Operation Cleaning Cylinder Fins Cleaning Silencer and Exhaust PortExhaust Port Cleaning Long Term Storage StorageEDR-260 SpecificationsExceptions Warranty Statements99922201032 11/18/2011 01/2010