Operating Techniques

•When starting to drill, run the engine at full throttle.

WARNING

BEFORE DRILLING, BE SURE TO READ AND UNDERSTAND THE ENTIRE OPERATOR’S MANUAL TO AVOID THE CHANCE OF SERIOUS INJURY.

•Do not force the drills and only move as quickly as the drills will allow.

•Stop the engine and disconnect from ignition cable before: - cleaning or when clearing a blockage; checking, maintenance or working on the machine.

•Handle fuel with care; it is highly flammable. Never add fuel to a machine with a running or hot engine.

•Do not attempt to repair the machine unless you are qualified to do so.

•Do not operate the machine with a damaged or excessively worn drill bit.

•Always ensure all handles and guards are fitted when using the machine. Never attempt to use an incomplete machine or one fitted with an unauthorized modification.

•When transporting or storing the machine always remove the drill bit.

•To reduce fire hazard keep engine and silencer free of debris, leaves or excessive grease.

•Handle drill with care, contacting with drills may cause injury.