Black & Decker 7252 instruction manual Specific Safety Rules

Page 3

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job betterand saferat the rate for whichit was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power toolʼs operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

• Hold tool by insulated gripping surfaces when performing an operation where the tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

• Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

• When working on a ladder or on scaffolding be sure to lay the tool down on its side when not in use. Some tools with large battery packs will stand upright but may be easily knocked over.

use safety glasses. Everyday eyeglasses areNOT safety glasses.

AlsoWARNING:use faceALWAYSor dust mask if drilling operation is dusty.ALWAYS WEARCERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities containsSomechemicexamplesls knownof theseto causchemicalscanceare:, birth defects• leadorfromothleadrreproductive-based paints,harm.

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Please Read Before Returning This Product for ANY Reason General Power Tool Safety Warnings Safety Guidelines DefinitionsSpecific Safety Rules Amperes Promote absorption of harmful chemicals75 ft 100 ft 125 ft 150 ft 175 ft 45.7 mReversing MaintenanceProblem Possible Cause Possible Solution TroubleshootingMode D’EMPLOI Tuyaux, des radiateurs, des cuisinièr Avertissements DE Sécurité GénérauxOu de Ésence de liqu des inflammables, de gRéparation Utilisation et entretien d’un outil électriqueLe plomb dans les peintures à base de plomb Conserver CES DirectivesInverseur DE Marche AccessoiresDépannage Problèm Cause possibl Solution possibleInformación Clave QUE Debe Conocer Manual DE InstruccionesRiesgobordesdeafiladosdescargao piezaseléctricamóviles Seguridad eléctricaUso y mantenimiento de la herramienta eléctrica Propensas a trabarse y son más fáciles de controlarMantenimiento Protección respiratoria según las normas NIOSH/OSHA/MSHA Normas DE Seguridad EspecíficasDará un golpe de corriente al operador Base, pero se pueden volcar fácilmenteReversa Instrucciones DE OperacionProblema Causa posible Solución posible Detección DE ProblemasEspecificaciones Solamente Para Propositos DE MexicoAños DE Garantia Esta Garantia no Aplica CuandoPara Servicio y ventas

7252 specifications

The Black & Decker 7252 is a versatile and reliable tool that has garnered attention for its user-friendly design and advanced features, making it a preferred choice for both DIY enthusiasts and professional contractors. Known for its power and durability, this product stands out in the competitive landscape of handheld electric tools.

One of the main features of the Black & Decker 7252 is its robust motor, which allows for effective and efficient operation. With a powerful output, this tool is capable of tackling a variety of tasks, making it suitable for everything from simple household projects to more complex renovation work. The tool’s variable speed settings provide users with added control, enabling them to adjust the speed according to the specific needs of the job.

Ergonomics play a crucial role in the design of the Black & Decker 7252. The lightweight and balanced structure ensure that users can handle it comfortably for extended periods without experiencing fatigue. The soft grip handle provides additional comfort, enhancing grip and reducing the risk of slips during operation. This is particularly beneficial when working on intricate or detailed tasks where precision is key.

Another notable characteristic of the 7252 is its built-in safety features. Equipped with an automatic shut-off mechanism, the tool will power down if it overheats, providing an additional layer of safety for users. This feature not only protects the tool from damage but also minimizes the risk of accidents in the workplace.

Technologically, the Black & Decker 7252 integrates innovative features that set it apart from its competitors. The tool includes a quick-change accessory system, allowing users to seamlessly switch out attachments without the need for additional tools. This system saves time and enhances productivity, making it an efficient option for busy tradespeople.

Additionally, the Black & Decker 7252 is designed for versatility. With multiple attachments available, users can easily adapt the tool for various applications such as sanding, grinding, or polishing. This flexibility extends the range of tasks that can be completed with a single tool, simplifying tool management and storage.

In summary, the Black & Decker 7252 combines power, safety, and versatility into a single user-friendly package. Its robust motor, ergonomic design, safety features, and innovative technology make it an exceptional choice for anyone looking to enhance their tool collection, whether for home improvement projects, professional work, or creative endeavors. This tool promises to deliver high performance and reliability, ensuring that it meets the diverse needs of its users.
Top Page Image Contents