Black & Decker 7252 instruction manual Maintenance, Reversing

Page 5

OPERATIWARNING: INSTRUCTIONSTo reduce the risk of serious personal injury, read, understand and follow all important safety warnings and instructions prior to using tool.

SwitchTo turn the drill ON squeeze the triggerswitch. The farther the trigger is depressed,the higher the speed of the drill. To turn the tool OFF release the trigger switch.

The drill can be locked ON (maximum RPM only) for continuous use by squeezing the trigger while pushing up on the locking button (Fig .1). Hold the locking buttonup while you release the trigger switch and then release the locking button. The drill will continueto run. To turn the drill OFF from a locked ON condition, squeeze and release the trigger

WARNING: The drill should only belocked ON when it is held stationaryni a drill press stand or other means; NOT BY HAND! Never unplug the tool with the locking feature engaged. To do so will cause the toolto start immediately the next time it isplugged in.

REVERSING

With the trigger switch released, slide the reversing switch, (Fig. 2) to align with the arrow pointing forward for drilling or toward the arrow pointing backward for running inreverse. After all reversing operations, switch the tool to the forward running mode.

NOTE: WHEN THE REVERSING SWITCH IS IN NEUTRAL THE DRILL WILLNOT OPERATE. DO NOTFORCE TRIGGER. SELECT FORWARD OR REVERSE BEFORE TURNING DRILL ON.

KEYLESSThis tool isCHUCKequippedOPERATIONwith a feature that automatically locks the spindle when the tool is not running. This feature is a normal condition which allows for tightening or loosening of the chuck with one hand while holding thedrill with the other. Loosen the chuck by rotatingthe sleeve counterclockwise (Fig. 3). Insert the bit or other accessory fully into the chuck, and tighten securely by rotating thesleeve in the clockwise direction as viewed from the chuck end.

Dril• Alwaysing unplug the drill when attaching or removing accessories. When usinga keyless chuck, hand tighten firmly.

• Use sharp drill bits only.

• Support and secure work properly, asinstructed in the Safety Instructions.

• Use appropriate and required safety equipment, as instructed in the safety instructions.

• Secure and maintain work area, as instructed in the safety instructions.

• Run the drill very slowly, using light pressure, until the hole is started enoughto keep the drill bit from slipping out of it.

• Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting but not so much as to stall the motor or deflect the bit.

• Hold the drill firmly to control its twisting action.

• DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO START IT. DAMAGE TO THE DRILL CAN RESULT.

• Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

• Keep the motor running while pulling the bit out of a drilled hole This will help reduce jamming.

• Use a cutting lubricant when drilling metals. The exceptions are cast iron andbrass which should be drilled dry. Thelubricants that work best are sulphurized cutting oilor lard oil. Bacon grease will also serve.

• When using twist drill bits to drill holes in wood, it will be necessary to pull the bits out frequently to clear chips from the flutes.

• Plug in drill. Make sure switch turns drill on and off.

WARNING: It is important to support the work properly and to holdthe drill firmly to

prevent loss of control which could cause personal injury If you have any questions on how to properly operate tool, call: 1-800-544-6986

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT:To assure product SAFETY and RELIABILITY, repairs, maintenanceand adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Please Read Before Returning This Product for ANY Reason General Power Tool Safety Warnings Safety Guidelines DefinitionsSpecific Safety Rules 75 ft 100 ft 125 ft 150 ft 175 ft Promote absorption of harmful chemicals45.7 m AmperesReversing MaintenanceProblem Possible Cause Possible Solution TroubleshootingMode D’EMPLOI Ou de Avertissements DE Sécurité GénérauxÉsence de liqu des inflammables, de g Tuyaux, des radiateurs, des cuisinièrRéparation Utilisation et entretien d’un outil électriqueLe plomb dans les peintures à base de plomb Conserver CES DirectivesInverseur DE Marche AccessoiresDépannage Problèm Cause possibl Solution possibleInformación Clave QUE Debe Conocer Manual DE InstruccionesRiesgobordesdeafiladosdescargao piezaseléctricamóviles Seguridad eléctricaMantenimiento Uso y mantenimiento de la herramienta eléctricaPropensas a trabarse y son más fáciles de controlar Dará un golpe de corriente al operador Normas DE Seguridad EspecíficasBase, pero se pueden volcar fácilmente Protección respiratoria según las normas NIOSH/OSHA/MSHAReversa Instrucciones DE OperacionProblema Causa posible Solución posible Detección DE ProblemasEspecificaciones Solamente Para Propositos DE MexicoPara Servicio y ventas Años DE GarantiaEsta Garantia no Aplica Cuando

7252 specifications

The Black & Decker 7252 is a versatile and reliable tool that has garnered attention for its user-friendly design and advanced features, making it a preferred choice for both DIY enthusiasts and professional contractors. Known for its power and durability, this product stands out in the competitive landscape of handheld electric tools.

One of the main features of the Black & Decker 7252 is its robust motor, which allows for effective and efficient operation. With a powerful output, this tool is capable of tackling a variety of tasks, making it suitable for everything from simple household projects to more complex renovation work. The tool’s variable speed settings provide users with added control, enabling them to adjust the speed according to the specific needs of the job.

Ergonomics play a crucial role in the design of the Black & Decker 7252. The lightweight and balanced structure ensure that users can handle it comfortably for extended periods without experiencing fatigue. The soft grip handle provides additional comfort, enhancing grip and reducing the risk of slips during operation. This is particularly beneficial when working on intricate or detailed tasks where precision is key.

Another notable characteristic of the 7252 is its built-in safety features. Equipped with an automatic shut-off mechanism, the tool will power down if it overheats, providing an additional layer of safety for users. This feature not only protects the tool from damage but also minimizes the risk of accidents in the workplace.

Technologically, the Black & Decker 7252 integrates innovative features that set it apart from its competitors. The tool includes a quick-change accessory system, allowing users to seamlessly switch out attachments without the need for additional tools. This system saves time and enhances productivity, making it an efficient option for busy tradespeople.

Additionally, the Black & Decker 7252 is designed for versatility. With multiple attachments available, users can easily adapt the tool for various applications such as sanding, grinding, or polishing. This flexibility extends the range of tasks that can be completed with a single tool, simplifying tool management and storage.

In summary, the Black & Decker 7252 combines power, safety, and versatility into a single user-friendly package. Its robust motor, ergonomic design, safety features, and innovative technology make it an exceptional choice for anyone looking to enhance their tool collection, whether for home improvement projects, professional work, or creative endeavors. This tool promises to deliver high performance and reliability, ensuring that it meets the diverse needs of its users.
Top Page Image Contents