Black & Decker 90504614 instruction manual General Safety Rules

Page 2

90504614 SC1400 Lith Ion drill 6/19/06 9:49 AM Page 2

General Safety Rules

WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1)Work area safety

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control

2)Electrical safety

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Recommended Minimum Wire Size for Extension Cords Total Length of Cord

25 ft.

50 ft.

75 ft.

100 ft.

125 ft.

150 ft.

175 ft.

7.6 m

15.2 m

22.9 m

30.5 m

38.1 m

45.7 m

53.3 m

Wire Size AWG

 

 

 

 

 

18

18

16

16

14

14

12

3)Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tool may result in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Catalog Number SC1400 VEA EL Español EN LA ContraportadaGeneral Safety Rules 90504614 SC1400 Lith Ion drill 6/19/06 949 AM Specific Safety Rules Safety Guidelines / DefinitionsFunctional Description Safety Warnings and Instructions BatteriesSafety Warnings and Instructions Charging Charging Procedure Important Charging NotesTorque Control Figure C Trigger Switch & Forward/Reverse Button Figure BOperating Instructions Dual Range Gearing Figure DDrilling Battery Level Indicator Figure FScrew Driving Drilling in WoodDrilling in Metal TroubleshootingMaintenance Drilling in MasonryFull TWO-YEAR Home USE Warranty AccessoriesService Information Mode D’EMPLOI Règles de sécurité générales Conserver CES Directives90504614 SC1400 Lith Ion drill 6/19/06 950 AM Règles DE Sécurité Spécifiques Conserver CES DirectivesAvertissements de sécurité et directives bloc-piles Description fonctionnelleProcédure de charge Avertissements de sécurité et directives chargementDétente et bouton de marche avant/marche arrière figure B FonctionnementRemarques importantes de chargement Correcteur de couple figure CIndicateur de niveau de charge figure F Engrenage à deux vitesses figure DMandrin sans clé figure E VissageLE Sceau Rbrcmc AccessoiresEntretien Dépannage Problème Cause possible555326-7100 Normas generales de seguridad Conserve Estas Instrucciones90504614 SC1400 Lith Ion drill 6/19/06 950 AM Normas DE Seguridad Específicas Conserve Estas InstruccionesDescripción de las Funciones Instrucciones y advertencias de seguridad Baterías Instrucciones y advertencias de seguridad cargaNotas importantes sobre la carga Procedimiento de cargaInstrucciones de operación Interruptor disparador y botón de avance/reversa Figura BPortabrocas sin llave Figura E Control de torsión Figura CEngranaje de doble alcance Figura D Indicador del nivel de carga de la batería Figura FTaladrado en madera DestornilladoTaladrado Taladrado en metalMantenimiento Información DE MantenimientoGUADALAJARA, JAL Garantía Completa DE DOS Años Para USO EN EL HogarCULIACAN, SIN MONTERREY, N.L PUEBLA, PUE90504614 SC1400 Lith Ion drill 6/19/06 950 AM 90504614 SC1400 Lith Ion drill 6/19/06 950 AM 90504614 SC1400 Lith Ion drill 6/19/06 950 AM

90504614 specifications

The Black & Decker 90504614 is a high-performing power tool accessory designed to enhance the efficiency and precision of your woodworking and construction projects. This product features a range of attributes that make it a reliable choice for both professionals and DIY enthusiasts alike.

One of the standout features of the 90504614 is its exceptional durability. Constructed with premium materials, it is engineered to withstand heavy usage and resist wear and tear. This durability ensures that users can rely on the tool for a long duration without experiencing significant degradation in performance. The rugged design is complemented by its lightweight build, making it easy to handle and maneuver, even in tight spaces.

Another characteristic that sets the Black & Decker 90504614 apart is its user-friendly design. It is compatible with a variety of Black & Decker power tools, allowing for seamless integration into your existing toolkit. This versatility means that you can easily switch between different tasks without needing to invest in multiple accessories. This adaptability is particularly beneficial for users who frequently tackle a wide range of projects.

Technologically, the 90504614 incorporates advanced engineering that enhances its cutting precision. Its sharp, high-strength blades are designed to provide clean cuts, reducing the need for post-processing and improving overall workflow. The tool is also equipped with features that minimize vibration, allowing for steadier operation and increased accuracy during use. This is particularly valuable for intricate tasks that demand high levels of concentration and finesse.

Moreover, safety is a paramount concern in power tool design, and the Black & Decker 90504614 delivers in this aspect too. It includes built-in safety features that help prevent accidents, making it suitable for users of varying skill levels. This focus on safety not only protects the user but also extends the lifespan of the tool itself.

In conclusion, the Black & Decker 90504614 is an impressive accessory that combines durability, versatility, cutting precision, and safety. Its thoughtful engineering makes it an excellent choice for anyone looking to enhance their toolkit with a reliable and efficient power tool accessory. Whether tackling home improvement projects or professional builds, the 90504614 is sure to meet and exceed user expectations.
Top Page Image Contents