Drilling in Wood, Drilling in Metal, Motor Brushes

English

as in Figure 5, or holding the head of the drill with one hand and operating the paddle switch with the other hand, holding the back end of the drill as in Figure 6.

Drilling in Wood

Holes in wood can be made with the same twist drills used for metal. These bits may overheat unless pulled out frequently to clear chips from the flutes. For larger holes, use spade bits, power auger bits, or hole saws. Work that is likely to splinter should be backed up with a block of wood.

Drilling in Metal

Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. The cutting lubricants that work best are sulphurized cutting oil or lard oil; bacon grease will also serve the purpose.

Drilling in Masonry

Use carbide tipped masonry bits at low speeds. Keep even force on the drill but not so much that you crack the brittle materials. A smooth, even flow of dust indicates the proper drilling rate.

Motor Brushes

Your tool will stop when the brushes wear out (down to about 3/16" (5mm) long). This prevents damage to the motor.

Accessories

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center.

If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 or call 1-800-433-9258.

CAUTION: The use of any other accessory not recommended

for use with this tool could be hazardous.
For safety in use, the following accessories should be used only in
sizes up to the maximums shown in the table below.	4
	4

FIG. 5

PADDLE

SWITCH

FIG. 4

FIG. 6

MAXIMUM RECOMMENDED CAPACITIES
Chuck Size	3/8"	1/4"	3/8"
Drill Speed (RPM)	1200	1200	2000
Twist Bits in Metal	3/8"	1/4"	3/8"
Flat Boring Bits in Wood	1-1/4"	3/4"	3/4"
Carbide Tipped Bits in Masonry	9/16"	1/2"	1/2"
Hole Saws in Wood or Metal	1-1/4"	1"	1"

DW160, DW161 specifications

The DeWalt DW160 and DW161 are two standout models in the brand's vast lineup of power tools, specifically engineered for professionals and serious DIY enthusiasts who demand efficiency, durability, and precision in their tasks. Both tools showcase DeWalt's commitment to innovation, performance, and user comfort, making them essential additions to any toolbox.

The DeWalt DW160 is a versatile electric drill designed for heavy-duty drilling tasks. Its powerful motor generates impressive torque, enabling it to handle a variety of materials such as wood, metal, and plastic with ease. One of the standout features of the DW160 is its variable speed control, allowing users to adjust the drilling speed to suit the specific application. From delicate tasks requiring finesse to robust drilling activities, this feature enhances control and effectiveness.

In addition to its impressive power, the DW160 incorporates a keyless chuck that allows for quick and easy bit changes. This facilitates efficient work, reducing downtime and maximizing productivity on the job site. The ergonomic design of the handle ensures comfort during extended use, significantly minimizing user fatigue.

On the other hand, the DeWalt DW161 is a premium model that elevates the performance profile with added features and technologies. It boasts a similar robust motor but is further enhanced with a built-in electronic clutch system that prevents damage to both the tool and workpiece by providing additional control during drilling. This feature is particularly advantageous when working with various materials that require distinct torque settings.

The DW161 also includes an integrated LED work light, illuminating dark work areas and enhancing visibility for precise drilling. This is especially practical for work in dimly lit locations, ensuring users can maintain accuracy without straining their eyes. The durable construction of the tool is another highlight, designed to withstand tough job site conditions and deliver reliable performance over time.

Both models are equipped with DeWalt’s proprietary technologies aimed at prolonging the life of the tool and enhancing safety. For instance, they include overload and overheating protection, ensuring optimal operation without compromising user safety.

In summary, the DeWalt DW160 and DW161 represent the pinnacle of drilling technology, combining powerful motors, variable speed controls, and ergonomic designs with features that cater to the professional user's needs. Whether tackling heavy-duty applications or precise tasks, both tools deliver exceptional results and stand as a testament to DeWalt’s legacy of quality and innovation in the power tool industry.